Blasted Dymags... - Page 2 - ZR-1 Net Registry Forums

-=Jeff=- · 02-01-2011

Quote:

Originally Posted by LGAFF

Need to put the conversion coating back on Dow 7, Zinc Chromate Primer, or Prekote. Otherwise it will Gas and bubble....try Aircraft spruce for the products.

All of those or ONE OF THOSE?

LGAFF · 02-01-2011

One of those......an expoxy primer will work too, but if you are clearing, then obviously primer is not needed.

Or keep it as is and use the Gibbs

BlackWidow#2 · 02-01-2011

Your wheels turned out great! Magnesium will polish and look fantastic, however they start to oxidize very quickly. Plan on polishing every 1-2 weeks to keep them looking good if you are driving much. Ask me how I know!
George

Toyvet1 · 02-02-2011

Lee, the plan was to drop them off sat to get finished. But Ive been snowed inat work and have to make a emergency trip out of town. How long before damage starts happening. From my research a couple weeks ?

LGAFF · 02-02-2011

Ken they really do not get damaged.....look at all of the 50s/60s Gasser wheels that are still around, Magnesium is used bare on engine/transmission parts.....Oxidation will form, but that really is not a big deal. Not prepping them means that the paint will not stick, people overract to magnesium wheels. MAgnesium is just not as flexible as alum and will snap or crank vs bend

You are fine..

LGAFF · 02-02-2011

Quote:

Originally Posted by LGAFF

Ken they really do not get damaged.....look at all of the 50s/60s Gasser wheels that are still around, Magnesium is used bare on engine/transmission parts.....Oxidation will form, but that really is not a big deal. Not prepping them means that the paint will not stick, people overract to magnesium wheels. MAgnesium is just not as flexible as alum and will snap or crank vs bend

You are fine..

I mean they are ruined already.....give you $10 for them

GOLDCYLON · 02-03-2011

They turned out very nice !

Toyvet1 · 02-04-2011

Dropped the wheels off today. Decided on a satin clear powercoat . If i was rich I would have gone with the polish and clear PC , but Im really happy with the raw casting look. They should be done in about 10 days.

LGAFF · 02-04-2011

They know to outgas the wheels before they PC, right?

They do look great

Brillo1990 · 02-07-2011

Quote:

Originally Posted by LGAFF

They know to outgas the wheels before they PC, right?

They do look great

When you say outgas them is this where someone was talking about heating them up before, I'm going to paint mine with clearcoat. If it is then how hot do you need to do it and for how long? I found a place to soda blast mine for $125 for the set and it close by. Thanks!

02-01-2011	#12
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Blasted Dymags... One of those......an expoxy primer will work too, but if you are clearing, then obviously primer is not needed. Or keep it as is and use the Gibbs __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

02-01-2011	#13
BlackWidow#2 Join Date: Feb 2004 Location: Pittsburgh, PA Posts: 149	Re: Blasted Dymags... Your wheels turned out great! Magnesium will polish and look fantastic, however they start to oxidize very quickly. Plan on polishing every 1-2 weeks to keep them looking good if you are driving much. Ask me how I know! George __________________ [SIGPIC][/SIGPIC]George C 91 Black/Black ZR1, #2 of 8 black widow cars 15 black/red Z06 :hello:

02-02-2011	#14
Toyvet1 Join Date: Dec 2007 Location: Bloomingdale, Il Posts: 330	Re: Blasted Dymags... Lee, the plan was to drop them off sat to get finished. But Ive been snowed inat work and have to make a emergency trip out of town. How long before damage starts happening. From my research a couple weeks ?

02-02-2011	#15
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Blasted Dymags... Ken they really do not get damaged.....look at all of the 50s/60s Gasser wheels that are still around, Magnesium is used bare on engine/transmission parts.....Oxidation will form, but that really is not a big deal. Not prepping them means that the paint will not stick, people overract to magnesium wheels. MAgnesium is just not as flexible as alum and will snap or crank vs bend You are fine.. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

02-03-2011	#17
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Blasted Dymags... They turned out very nice ! __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

02-04-2011	#18
Toyvet1 Join Date: Dec 2007 Location: Bloomingdale, Il Posts: 330	Re: Blasted Dymags... Dropped the wheels off today. Decided on a satin clear powercoat . If i was rich I would have gone with the polish and clear PC , but Im really happy with the raw casting look. They should be done in about 10 days.

02-04-2011	#19
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Blasted Dymags... They know to outgas the wheels before they PC, right? They do look great __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode