12-21-2010 | #11 |
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: Some "Dynomite" Heads!
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 Last edited by Locobob; 12-21-2010 at 04:15 PM. |
12-21-2010 | #12 |
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Some "Dynomite" Heads!
|
12-21-2010 | #13 |
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: Some "Dynomite" Heads!
The "boring" or the "not funny"??? Dont hurt my feelings now Carter
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
12-21-2010 | #14 |
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Some "Dynomite" Heads!
It's all good. Just giving you a little pre Christmas "goose"
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
12-21-2010 | #15 |
Join Date: Dec 2005
Location: Tinton Falls, NJ
Posts: 1,177
|
Re: Some "Dynomite" Heads!
Thanks for the starting info! Dynomite is getting good head . Locobob gave me a great education in porting & cleared up a lot of misinformation that I had., Dyno will be more than happy with the work. Keep this thread updated with you progress.
|
12-21-2010 | #16 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Some "Dynomite" Heads!
Im paying down the Bottom half was home to get the set back together
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
12-21-2010 | #17 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Some "Dynomite" Heads!
Well im confused I though this was machinst porn
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
12-27-2010 | #18 |
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: Some "Dynomite" Heads!
Got a little more time in on the heads. Currently I am still working on enlarging the primary intake ports and also matching them to the injector housings.
Here we have the bottom of the injector housing with the balsa wood template in place. I like to use this small dremel sander to trace around the ports - it is easy to control and allows me to precisely control any angle so as to get a proper representation of the top of the port. Same template only now applied to the head. I use this fine marker to trace the pattern onto the mating surface of the head. Same head now with the balsa template removed, you can see the red marker designating the area to be worked in order to match up the head ports with the injector housing ports. Generally I repeat this process 3 or 4 times until I am at the size I want and have a good match. A bit overkill... yeah probably but it helps to keep and eye on your work as you go - otherwise you can end up with mistakes that are hard to correct. Primary ports in these photos are 35mm at the mating surface and will end up being about 36mm when I am finished.
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
12-27-2010 | #19 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Some "Dynomite" Heads!
Thing of beauty! Thanks for sharing, once I get the motor out of the 90, going to port the heads....first venture with head porting.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
12-28-2010 | #20 |
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
|
Re: Some "Dynomite" Heads!
This is my first start to finish head porting venture also Lee. It is nice having the set I reworked handy for reference.
__________________
Robert ZR-1 Net Registry Oregon State Director 91 ZR-1 #431 Black/Black LPE 368 |
Thread Tools | |
Display Modes | |
|
|