|
|
|||||||
| View Poll Results: Which aftermarket Flywheel do you have? | |||
| Centerforce |
   
|
1 | 1.92% |
| DRM |
  
|
2 | 3.85% |
| Fidanza |
  
|
45 | 86.54% |
| Jeal Enterprises |
  
|
1 | 1.92% |
| McLeod |
  
|
3 | 5.77% |
| Voters: 52. You may not vote on this poll | |||
 |
|
|
Thread Tools | Display Modes |
07-13-2009
|
#11 |
 Join Date: Jul 2009
Location: Texas
Posts: 793
|
Re: Which aftermarket Flywheel do you have?
I just got mine and it has a Fidanza fly. and it rattles under load and below 2000rpm it sound as if the front bearing of the trans is bad. It maybe more that just the fly. Its also the noisest when its warmed up.
Dave Last edited by mgbrv8; 07-13-2009 at 01:21 PM. |
|
|
|
07-13-2009
|
#12 | |
 
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
|
Re: Which aftermarket Flywheel do you have?
Quote:
Not to worry though it will not hurt anything except your pride. 
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln |
|
|
|
|
|
07-13-2009
|
#13 |
|
Join Date: Jul 2009
Location: Texas
Posts: 793
|
Re: Which aftermarket Flywheel do you have?
will a trans rebuild and a clutch disk with dampener springs cure the problem?
Dave |
|
|
|
|
07-13-2009
|
#14 | |
|
Guest
Posts: n/a
|
Re: Which aftermarket Flywheel do you have?
Quote:
I believe John used the sprung disk. Raising the idle will help some when sitting at a light. But a rebuild will not help. |
|
|
|
|
07-13-2009
|
#15 | |
|
Join Date: Dec 2003
Location: McHenry, Il.
Posts: 6,607
|
Re: Which aftermarket Flywheel do you have?
Quote:
The only cure is to put the stock dual-mass flywheel back in. That is why they used the dual-mass in the first place was to quiet the rattle. I call it the rut-rut-rut sound. But then you will give up all the performance gains of the light flywheel.
__________________
http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln |
|
|
|
|
|
07-13-2009
|
#16 |
|
Join Date: Jul 2009
Location: Texas
Posts: 793
|
Re: Which aftermarket Flywheel do you have?
Well hopefully you guys will get to know that I’m not a quitter I’m an engineer and machinist. Nothing is impossible just impractical. I look forward too the challenge if that’s all there is too it and no trans damage.
Dave |
|
|
|
|
07-13-2009
|
#17 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Which aftermarket Flywheel do you have?
Quote:
It really isn't as big an issue as you may think. The noise comes from uneven pulsing from the motor causing the synchros to rattle. The dual mass absorbs that vibration. A sprung hub disk helps do the same altho nowhere near as completely. However, with judicious tuning and slight raising of idle (mine is in the 725rpm range), the uneven pulsation is better controlled significantly diminishing the rattle from the synchros. Choice of trans fluid also contributes to making the single mass acceptable. |
|
|
|
|
|
08-07-2009
|
#18 |
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Which aftermarket Flywheel do you have?
Fidanza. Because Micheal Savage told me to.
|
|
|
|
|
08-07-2009
|
#19 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Which aftermarket Flywheel do you have?
Quote:
|
|
|
|
|
|
08-07-2009
|
#20 | |
|
Join Date: Aug 2008
Location: Houston 90 Red ZR-1
Posts: 2,320
|
Re: Which aftermarket Flywheel do you have?
Quote:
|
|
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
