One of our ZR-1 brothers in Japan just picked up a ZR-1 race car - Page 2 - ZR-1 Net Registry Forums

Ccmano · 01-05-2010

PIX... I need more PIX!!!

H

GOLDCYLON · 01-05-2010

mega kueal we need to know more about this car

Bell Curve · 01-05-2010

Quote:

Originally Posted by Jeffvette

Nice splitter as well.

Need more details ASAP!!!

Tyler Townsley · 01-06-2010

Not a ZR-1.

Tyler

tomtom72 · 01-06-2010

Quote:

Originally Posted by Tyler Townsley

Not a ZR-1.

Tyler

I don't see the high brake light either, but it could be the angle of the photo? I had to look again after your post Tyler, and if you look at the doors I believe you can see the wider skin? I use the area just under the window felt and the area just above the door handle as a "tell-tale". On our cars that part of the skin sticks out enough to almost make for a flat area before the door skin curves away top to bottom. On the reg C4's the door skin starts it's curve right at the felt? That and the flat of the body on the top of the rear panel (fender) has a continuation to over our door hdls vs the regular C4 it stops at the door seam. No?

JMHO

01-06-2010

Like I said, I don't know the details and imagine it is a 385 and not a 383; he tried his best in english text message to explain to me. He primarily wants the motor since to rebuild his LT5 was going to cost much more than the entire car. If it is not a Z body/chassis, I would imagine it at least has an LT5 as he indicated. I'm not questioning or doubting anything until more details and pics are provided.

bdw18_123 · 01-06-2010

Quote:

Originally Posted by tomtom72

I don't see the high brake light either, but it could be the angle of the photo? I had to look again after your post Tyler, and if you look at the doors I believe you can see the wider skin? I use the area just under the window felt and the area just above the door handle as a "tell-tale". On our cars that part of the skin sticks out enough to almost make for a flat area before the door skin curves away top to bottom. On the reg C4's the door skin starts it's curve right at the felt? That and the flat of the body on the top of the rear panel (fender) has a continuation to over our door hdls vs the regular C4 it stops at the door seam. No?

JMHO

I agree, body looks wide just below the halo. Also, look at the windshield. It has the purple hue to it, that car probably is a ZR-1.

.

01-06-2010

Still waiting for more details

USAFPILOT · 01-06-2010

delamination on the top drivers side corner and a radar cutout...it is at least a zr1 windshield.

01-07-2010

Sorry, let me shoot him another email to let him know we are all waiting to know more about this!!!

I want to know more about this one too:

01-05-2010	#11
Ccmano Join Date: Jun 2006 Location: Sparks, NV Posts: 2,852	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car PIX... I need more PIX!!! H __________________ 90'ZR-1 #1461 Red/Black Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold 08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold 05 C6 Z51 Red/Black Sold 90'ZR-1 #1723 Black/Gray Sold but not forgotten 91' Z51 L98 White Vert. My First, you always remember your first. Sold.

01-05-2010	#12
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car mega kueal we need to know more about this car __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-06-2010	#14
Tyler Townsley Join Date: May 2005 Location: Nichols, FL Posts: 615	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car Not a ZR-1. Tyler __________________ 55 Polo White (Project) 61 Jewel Blue (Sold to buy above) 66 Nassau Blue 68 Torch Red 88 ZR1 Blue 90 ZR1 White

01-06-2010	#16
HAWAIIZR-1 Guest Posts: n/a	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car Like I said, I don't know the details and imagine it is a 385 and not a 383; he tried his best in english text message to explain to me. He primarily wants the motor since to rebuild his LT5 was going to cost much more than the entire car. If it is not a Z body/chassis, I would imagine it at least has an LT5 as he indicated. I'm not questioning or doubting anything until more details and pics are provided.

01-06-2010	#18
Jeffvette Guest Posts: n/a	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car Still waiting for more details Last edited by Jeffvette; 01-06-2010 at 03:51 PM.

01-06-2010	#19
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,348	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car delamination on the top drivers side corner and a radar cutout...it is at least a zr1 windshield.

01-07-2010	#20
HAWAIIZR-1 Guest Posts: n/a	Re: One of our ZR-1 brothers in Japan just picked up a ZR-1 race car Sorry, let me shoot him another email to let him know we are all waiting to know more about this!!! I want to know more about this one too: Last edited by HAWAIIZR-1; 01-07-2010 at 03:04 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode