ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 12-23-2009   #11
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Re: Thickness of water pump gasket??

I had the exact problem a couple of years ago. When the pump was toqued down, the housing's flange tabs were visibly bent and I can't believe they didn't snap off. The pump was from smyths, it was a rebuild from a popular rebuild that does sbc's. I can't remember what it was, would remember it if heard it though. The impeller was not close to the quality of a ac delco. The impeller looked like it was from a rough cast, as ac delco looked like a forging, and perfect. I don't have the measurements any more, but I remember the rebuild's impeller measured thicker than the ac delco and could not be pressed on any farther. The one I had was way out, four gaskets might of fixed it if leaks weren't an issure. I thought of it as..... if least somebody is trying to make one fit, and it could fit after removing it and remachining it, then it could be an option when ac's aren't available.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 12-24-2009   #12
tomtom72
 
tomtom72's Avatar
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
Default Re: Thickness of water pump gasket??

I know that this might not be of any use Shawn. I seem to remember Marc Haibeck doing a paper on re-built LT5 pumps and this very issue, impellar binding upon T/Q'ing it in place.

I just can't remember if it was in an issue of HOTB or a paper over at his site. I know I read it and thought that I should buy a OE replacement pump now ( back in '06 ) instead of waiting till my pump went south.

Sorry i can't be of more help.

Merry Christmas!

Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
tomtom72 is offline   Reply With Quote
Old 12-24-2009   #13
ShawnZR-1
 
ShawnZR-1's Avatar
 
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 81
Default Re: Thickness of water pump gasket??

It's the fecking impeller! It's warped... worse than me!

Ok, I'm done with "reman", biting the bullet!
__________________

1991 Chevrolet Corvette ZR-1
ShawnZR-1 is offline   Reply With Quote
Old 12-24-2009   #14
Scrrem
 
Scrrem's Avatar
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
Default Re: Thickness of water pump gasket??

Quote:
Originally Posted by ShawnZR-1 View Post
It's the fecking impeller! It's warped... worse than me!

Ok, I'm done with "reman", biting the bullet!
Wow, just checked my "reman" pump, looks like mine is OK..crossing my fingers
__________________
1990 Bright Red Coupe #608

380 Stroker, Ported Heads/Intake/Housings/TB
Haibeck Secondary Delete Chip / Pete's Cams
George Braml Intake / FIC Injectors
Coated SW Headers / Corsa
Bill Boudreau B/B ZF6 / Viper 4.10 gears
Ron Davis Radiator
Pioneer AVIC-Z140BH NAV
Fikse FM5's 285 / 335 / C6 Brakes

WAZOO Member
Scrrem is offline   Reply With Quote
Old 12-27-2009   #15
ShawnZR-1
 
ShawnZR-1's Avatar
 
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 81
Default Re: Thickness of water pump gasket??

Hey Scrrem, where did you get your reman'd pump? I'm having more difficulty finding someone that has a NOS AC Delco in stock for less than $400. Sorry, that number is just insane!
__________________

1991 Chevrolet Corvette ZR-1
ShawnZR-1 is offline   Reply With Quote
Old 12-27-2009   #16
ShawnZR-1
 
ShawnZR-1's Avatar
 
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 81
Default Re: Thickness of water pump gasket??

Quote:
Originally Posted by Dynomite View Post
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

With gasket and it all fits perfectly
Sonofabitch! I checked ebay and searched on ZR-1 because ZR1 returned a thousand hits!

Thanks! I'll order up in the morning!
__________________

1991 Chevrolet Corvette ZR-1
ShawnZR-1 is offline   Reply With Quote
Old 12-27-2009   #17
A26B
 
A26B's Avatar
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
Default Re: Thickness of water pump gasket??

I have 5 left, but they are $320. New, OEM AC Delco. They are on the web site.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
A26B is online now   Reply With Quote
Old 12-27-2009   #18
Scrrem
 
Scrrem's Avatar
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
Default Re: Thickness of water pump gasket??

Quote:
Originally Posted by ShawnZR-1 View Post
Hey Scrrem, where did you get your reman'd pump? I'm having more difficulty finding someone that has a NOS AC Delco in stock for less than $400. Sorry, that number is just insane!
Bought it a few weeks ago from a felllow member here in VA. The pump is in a NAPA box, hoping it installs with no issues.

Rich
__________________
1990 Bright Red Coupe #608

380 Stroker, Ported Heads/Intake/Housings/TB
Haibeck Secondary Delete Chip / Pete's Cams
George Braml Intake / FIC Injectors
Coated SW Headers / Corsa
Bill Boudreau B/B ZF6 / Viper 4.10 gears
Ron Davis Radiator
Pioneer AVIC-Z140BH NAV
Fikse FM5's 285 / 335 / C6 Brakes

WAZOO Member
Scrrem is offline   Reply With Quote
Old 12-28-2009   #19
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Re: Thickness of water pump gasket??

Here is another source for LT5 water pumps:

http://www.parts123.com/parts123/yb....Z5Z5Z50000050F

Last edited by Jagdpanzer; 12-28-2009 at 05:58 PM.
Jagdpanzer is offline   Reply With Quote
Old 12-28-2009   #20
ShawnZR-1
 
ShawnZR-1's Avatar
 
Join Date: Jul 2005
Location: Atlanta, GA
Posts: 81
Default Re: Thickness of water pump gasket??

Nice! Do we know if that's reman'd? They're closed until next year... if I don't have a suitable replacement by then, I'll order from Corvette Central!
__________________

1991 Chevrolet Corvette ZR-1
ShawnZR-1 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020