|
03-03-2012
|
#131 |
 
Join Date: Mar 2008
Location: Pendleton, IN
Posts: 668
|
Re: OBX cat-back exhaust
I had the same header kit as you have from the group buy David set up. The problem I had was that the small pipe coming off the passenger cat was about an inch too long, so I had to have an inch taken out of the middle of it. JVD posted here with the same issue with a kit built for stock mounting points. Nobody has reported the problem recently, so perhaps SW shortened the pipe a bit since then - but you have an early set. Hopefully you'll not have that problem!
|
|
|
|
03-03-2012
|
#132 |
 Join Date: Sep 2011
Location: TN
Posts: 580
|
Re: OBX cat-back exhaust
This thread has a lot of great useful info .. Is there a way to archive it for future reference ?
|
|
|
|
|
03-03-2012
|
#133 | |
 
Join Date: May 2010
Location: Japan
Posts: 3,569
|
Re: OBX cat-back exhaust
Quote:
 He'll be all over it..........
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 
|
|
|
|
|
|
03-03-2012
|
#134 | |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,637
|
Re: OBX cat-back exhaust
Quote:
Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
|
|
03-05-2012
|
#135 | |
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,906
|
Re: OBX cat-back exhaust
Quote:
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
|
03-05-2012
|
#136 |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,684
|
Re: OBX cat-back exhaust
Pretty sure obx prices are increasing like the headers did
Buy them while they are dirt cheap! David |
|
|
|
|
03-05-2012
|
#137 | |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
|
Re: OBX cat-back exhaust
Quote:
Concur
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
03-06-2012
|
#138 |
|
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,536
|
Re: OBX cat-back exhaust
Thanks Brett, I haven't seen mine yet, and UPS has not recieved them for shipping. I'd have been real worried if not for you. Somebody mentioned air tubes. Will I have to have them custom installed?
|
|
|
|
|
03-06-2012
|
#139 | |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,906
|
Re: OBX cat-back exhaust
Quote:
Don't know yet. it'll be a couple of weeks before the car goes to Pete.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project Last edited by Blue Flame Restorations; 03-06-2012 at 05:51 PM. |
|
|
|
|
|
03-06-2012
|
#140 |
|
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,536
|
Re: OBX cat-back exhaust
I did get my gaskets, thanks Jerry. And I got my dip stick bracket, thanks Paul.
Thanks to everybody for filling me in on what I needed and didn't know about. I'm sure it will make the install easier. Steve |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
