|
09-14-2010
|
#1 |
|
Join Date: Feb 2004
Location: Las Vegas
Posts: 17
|
need some fuel "O" rings
I need the "O" rings for the fuel block connection to the fuel rail (#1 and #2 on the FSM drawing). I could probably use a few of the IH primary (large) "O" rings since I found 1 leaking and encrusted with the same gunk that was on the #1 and #2 "O" rings. A few injectors look like they could use new #86 "O" rings, too.
I checked a few parts houses and they didn't have them. Our local Chebby dealer said they were only available in the aftermarket, and their supplier was EXTREMELY expensive. So...do any of you have any of these available for sale? 
|
|
|
|
09-14-2010
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: need some fuel "O" rings
Maybe Jerry?
http://jerrysgaskets.com/store2/root/ http://jerrysgaskets.com/store2/root...roducts_id=400
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 09-14-2010 at 07:05 PM. |
|
|
|
|
09-14-2010
|
#3 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: need some fuel "O" rings
Yeah I think Jerry has some
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
09-14-2010
|
#4 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: need some fuel "O" rings
Thanks to everyone for the referrals!
Look on pages 3 & 4 (link to page 3 as follows) You have a choice of Buna or Viton-A, which ever you prefer. http://jerrysgaskets.com/store2/root...ort=20a&page=3 Also have complete fuel system sets in Buna or Viton-A, and have also added some different "Kit" options in the Gasket Kit sub-category. http://jerrysgaskets.com/store2/root...cPath=16_19_20
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. Last edited by A26B; 09-14-2010 at 07:12 PM. |
|
|
|
|
09-14-2010
|
#5 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: need some fuel "O" rings
I replaced mine with Jerry's, top quality stuff as always!
|
|
|
|
|
09-14-2010
|
#6 |
|
Join Date: Feb 2004
Location: Las Vegas
Posts: 17
|
Re: need some fuel "O" rings
Thanks, guys. That's what I need. Thanks for the page, Jerry.
|
|
|
|
|
09-14-2010
|
#7 |
|
Join Date: Feb 2004
Location: Las Vegas
Posts: 17
|
Re: need some fuel "O" rings
Oh....speaking of gaskets/seals: when I pulled the plenum this time there was a lot of grunge stuck to the underside of the air intake horn and TB area. The engine is normally very,very clean and hadn't had any oily crap that I could really see before I stopped driving it. But it was pretty grimy and even the valley had a layer of oily/grungy dirt on it. That's not normal for my car, so I'm wondering if there is a smog line or seal on the front of the engine that might be leaking.
I know I need a new oil pressure sending unit, but I think this is different. Thoughts?? |
|
|
|
|
09-14-2010
|
#8 |
Join Date: Dec 2005
Location: Delanson, NY
Posts: 916
|
Re: need some fuel "O" rings
Are all the bolts tight on the crankcase ventilation cover? Mine was seeping, made a mess. Jerry has that gasket too.
Also check the 3 bolts on the oil filter housing. 
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
