The Next WAZOO WMD - April 3rd - ZR-1 Net Registry Forums

QB93Z · 04-01-2010

Thanks to everyone who came out to the LT5 Teardown. I had a great time.

The next Westminster Maintenance Day (WMD) will be Saturday, April 3rd. We plan to start about 9:00 AM.

The place is Jim's Garage in Westminster, Maryland.

We will be replacing Rich's clutch and installing a light weight flywheel.

The lift will be busy but if any one has any other maintenance items that we can work on together come on in.

If you have ever wondered about the performance pros and cons of a light weight flywheel, here is your chance to see it first hand. We will be doing a before and after comparison on Saturday.

Call me if you need directions or more info.

Jim
443-244-1347

secondchance · 04-01-2010

I have my wife's sister, her daughter - Swedish niece and her husband visiting. I am hoping all the girls will be occupied shopping. In which case I will take niece's hubby (young Swede) and show him around good-ole American countryside - I am thinking Westminster, MD...

Scrrem · 04-01-2010

To beat yours and Darrin's "clutch replacement" record, I have to be under 3 hours....right?

Rich

Jagdpanzer · 04-01-2010

Sorry I can't make it this weekend.
Be sure to have plenty of brake cleaner on hand for the Rich's job.

Scrrem · 04-01-2010

Quote:

Originally Posted by Jagdpanzer

Sorry I can't make it this weekend.
Be sure to have plenty of brake cleaner on hand for the Rich's job.

Thanks Phil, will pick up break cleaner and red locktite....
Rich

QB93Z · 04-01-2010

Excellent SC, It will be nice to meet your family and/or relatives.

Darrin has set a high bar for us to get over. Since your C-Beam has been out recently, I think we will get it done without any problem. I am not sure we will beat that time with the flywheel install.

Jim

Aurora40 · 04-01-2010

Hmm, as one considering the flywheel upgrade I may have to see this done!

ZR-1nce removed · 04-02-2010

Quote:

Originally Posted by Scrrem

To beat yours and Darrin's "clutch replacement" record, I have to be under 3 hours....right?

Rich

I hope you beat the existing record! Then Jim and I will have something to aspire to when we do his clutch and tranny. I will stop by when I get off work at 15:00, although I expect you will be finished by then. Good Luck!

RICKYRJ1 · 04-03-2010

Quote:

Originally Posted by ZR-1nce removed

I hope you beat the existing record! Then Jim and I will have something to aspire to when we do his clutch and tranny. I will stop by when I get off work at 15:00, although I expect you will be finished by then. Good Luck!

Hey poor ole' farmer, It takes you till 15:00 to count all those bags of money?

I would call that 4-play not work

I have to work tomorrow, Everyone have a great weekend, I'll catch you all on the next WMD

ZR-1nce removed · 04-03-2010

How about a live video feed for us poor civil servants who are stuck at work today? I'm sure the WAZOO IT team can handle this without a problem, right?

04-01-2010	#1
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	The Next WAZOO WMD - April 3rd Thanks to everyone who came out to the LT5 Teardown. I had a great time. The next Westminster Maintenance Day (WMD) will be Saturday, April 3rd. We plan to start about 9:00 AM. The place is Jim's Garage in Westminster, Maryland. We will be replacing Rich's clutch and installing a light weight flywheel. The lift will be busy but if any one has any other maintenance items that we can work on together come on in. If you have ever wondered about the performance pros and cons of a light weight flywheel, here is your chance to see it first hand. We will be doing a before and after comparison on Saturday. Call me if you need directions or more info. Jim 443-244-1347 __________________ If it isn't fun, you aren't doing it right! 1990 Black ZR-1 - sold 1993 Quasar Blue ZR-1 1994 Competition Yellow ZR-1 1995 Dark Purple ZR-1 Maryland State Coordinator WAZOO Member Last edited by QB93Z; 04-01-2010 at 10:50 AM. Reason: Explain WMD

04-01-2010	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,727	Re: The Next WAZOO WMD - April 3rd I have my wife's sister, her daughter - Swedish niece and her husband visiting. I am hoping all the girls will be occupied shopping. In which case I will take niece's hubby (young Swede) and show him around good-ole American countryside - I am thinking Westminster, MD...

04-01-2010	#3
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,467	Re: The Next WAZOO WMD - April 3rd To beat yours and Darrin's "clutch replacement" record, I have to be under 3 hours....right? Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

04-01-2010	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,663	Re: The Next WAZOO WMD - April 3rd Sorry I can't make it this weekend. Be sure to have plenty of brake cleaner on hand for the Rich's job.

04-01-2010	#6
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,689	Re: The Next WAZOO WMD - April 3rd Excellent SC, It will be nice to meet your family and/or relatives. Darrin has set a high bar for us to get over. Since your C-Beam has been out recently, I think we will get it done without any problem. I am not sure we will beat that time with the flywheel install. Jim

04-01-2010	#7
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: The Next WAZOO WMD - April 3rd Hmm, as one considering the flywheel upgrade I may have to see this done! __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

04-03-2010	#10
ZR-1nce removed Join Date: Jan 2009 Location: Gettysburg, PA Posts: 247	Re: The Next WAZOO WMD - April 3rd How about a live video feed for us poor civil servants who are stuck at work today? I'm sure the WAZOO IT team can handle this without a problem, right?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode