ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 03-01-2010   #1
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Header Bolt Battle

Picking up from my last battle with a Mobile 1 oil filter....I am in the midst of a header install.....as the motor was pulled and rebuilt once, apparently the tech that did the headers must have mistaken the head torque specs with the head(er)......Several of these have taken a cheater to get them to move...having high miles the corrosion does not help.

Needless to say there was one bolt that decided it did not wish to depart. The bolt head rounded off when I used the cheater. Heat, bolt extractor socket, etc has not worked. Wondering if the next step is to get an angle grinder to either 1)cut off the bolt head 2)cut the bolt spacer to relieve some of the pressure. Its at least one of the easier bolts to get to.
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 03-01-2010   #2
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,804
Default Re: Header Bolt Battle

So....I assume the headers are still on since the bolt head is still on .......cut the head off (head only or round the head so you can get the heads off) and get the headers removed.

Then work on the bolt.......maybe a bit of heat or all sorts of other possible methods might help once you have the headers removed. With the headers removed you also have a bit more room to work. You do NOT want to break the bolt flush with the block....so heat might be your answere.

Last edited by Dynomite; 03-01-2010 at 01:18 AM.
Dynomite is offline   Reply With Quote
Old 03-01-2010   #3
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
Default Re: Header Bolt Battle

Gay....PIA. Sorry buddy.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.
flyin ryan is offline   Reply With Quote
Old 03-01-2010   #4
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Header Bolt Battle

Just to be clear...these are the exhaust manifold bolts, whoever put this thing on went alittle overboard on the torque or corrision has seized them. Engine is in the car.
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 03-01-2010   #5
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,804
Default Re: Header Bolt Battle

Quote:
Originally Posted by LGAFF View Post
Just to be clear...these are the exhaust manifold bolts, whoever put this thing on went alittle overboard on the torque or corrision has seized them. Engine is in the car.
I know...that is what I was referring to......exhaust headers....I called them heads as I was writing about Hockey for Ryan at the same time....

It would be kind of hard cutting the head of one of those head bolts for sure....
Dynomite is offline   Reply With Quote
Old 03-01-2010   #6
Jeffvette
Guest
 
Posts: n/a
Default Re: Header Bolt Battle

If it is easy to get to, take a grinder and cut the head off, and either use vice grips to get the bolt out, or weld a new nut on and then remove.
  Reply With Quote
Old 03-01-2010   #7
LGAFF
 
LGAFF's Avatar
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
Default Re: Header Bolt Battle

Thanks Jeff......

Has anyone ever gotten one of these extractors(sockets) to work, only needed to try one a few times, but never gotten them to work.
__________________
LGAFF
90 #966-150K miles-sold
92 #234-sold
1987 Callaway TT #17
1991 ZR-1 #1359
LGAFF is offline   Reply With Quote
Old 03-01-2010   #8
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,804
Default Re: Header Bolt Battle

Quote:
Originally Posted by Jeffvette View Post
If it is easy to get to, take a grinder and cut the head off, and either use vice grips to get the bolt out, or weld a new nut on and then remove.
I prefer vice grips and heat as I have never had any luck welding on a new nut especially in a tight space......nut always broke off again and again.....
Dynomite is offline   Reply With Quote
Old 03-01-2010   #9
Jeffvette
Guest
 
Posts: n/a
Default Re: Header Bolt Battle

Quote:
Originally Posted by LGAFF View Post
Thanks Jeff......

Has anyone ever gotten one of these extractors(sockets) to work, only needed to try one a few times, but never gotten them to work.

They are hit or miss, by the time they are really rounded off, the extractors don't work as well.
  Reply With Quote
Old 03-01-2010   #10
flyin ryan
 
flyin ryan's Avatar
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
Default Re: Header Bolt Battle

The liquid wrench is always good. Can try some penetrating oil first if you haven't yet, even though 'Uphill' it will find it's way up into the threads a certain amount at least, can't hurt to try if you don't have bottles handy.
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.
flyin ryan is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020