ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 01-22-2010   #1
xlr8nflorida
 
xlr8nflorida's Avatar
 
Join Date: May 2008
Location: USA
Posts: 1,096
Default BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

I had a great conversation with TomTom72 the other day in regards to fluids in the ZR-1.

Seems like this fluid is the way to go and Bill B also seems to recommend it for the ZF-6 which in and of itself should make it a no brainer. Tom uses it with no problems whatsoever and he does a decent amount of mileage per year.

Upon researching it on several forums, it appears that there are also a bunch of guys who don't like it and question the choice. However, we all know everybody has their opinion.

I would be interested to see who all here is running the Castrol and how long you have been running it in your transmission and any issues/concerns?

Also, apparently there are others that are approved to such as the old gm stuff, the newer revised Gm fluids and apparently some others.

If you know, please post the part #s.

Thanks for your help.
xlr8nflorida is offline   Reply With Quote
Old 01-22-2010   #2
Polo-1
 
Join Date: Sep 2005
Location: Washington
Posts: 955
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

Had Redline, it foamed out and was all over under the car. This was from high speed run 150+ for 10 miles.

Used the BMW shifting was smoother, from Redline. No foam out.

The last in it is, Amsoil Synchromesh. No high speed runs yet. shifter feels same or smoother then BMW.
Polo-1 is offline   Reply With Quote
Old 01-22-2010   #3
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,078
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

My trans gets a little funny every once in awhile if I hit third gear a little rough so Ive been wanting to replace the trans fluild but havent had a chance.I was going to checkout the Castrol but might look into the Amsoil.
Z51JEFF is offline   Reply With Quote
Old 01-22-2010   #4
TFENT
 
Join Date: Dec 2008
Location: San Diego
Posts: 189
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

I put it in mt Vette and it quieted everything down. Now is smooooth....
__________________
Tom
MovIt Brakes USA
[url]www.TFEnt.com[/url]
TFENT is offline   Reply With Quote
Old 01-22-2010   #5
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

I've been running the castrol tws, I had two oil analysis done on it after 3000 miles and on both of them the viscosity dropped to 30 weight oil. Haven't had any problems though, but I change it every 3000 miles for that reason. Some others at the track run redline shockproof and don't have any problems.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 01-22-2010   #6
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,797
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

Quote:
Originally Posted by lbszr View Post
I've been running the castrol tws, I had two oil analysis done on it after 3000 miles and on both of them the viscosity dropped to 30 weight oil. Haven't had any problems though, but I change it every 3000 miles for that reason. Some others at the track run redline shockproof and don't have any problems.
You change your transmission oil (Castrol TWS 10W-60) every 3,000 miles?

Viscosity dropped from 60 wt oil to 30 wt oil? I guess this is normal as Bill B. suggested viscosity drops from 60 wt to 37 wt after 12,000 miles.

Last edited by Dynomite; 01-22-2010 at 05:22 PM.
Dynomite is offline   Reply With Quote
Old 01-22-2010   #7
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

BMW Castrol.
XfireZ51 is offline   Reply With Quote
Old 01-22-2010   #8
lbszr
 
lbszr's Avatar
 
Join Date: Nov 2006
Location: dayton,ohio
Posts: 425
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

Quote:
Originally Posted by Dynomite View Post
You change your transmission oil (Castrol TWS 10W-60) every 3,000 miles?

Viscosity dropped from 60 wt oil to 30 wt oil? I guess this is normal as Bill B. suggested viscosity drops from 60 wt to 37 wt after 12,000 miles.
Actually that's with about 2000 miles of track time between 4,000 and 6,000 rpm for 25 minute intervals, with it running hotter than normal and higher torque than normal for that amount of miles. I just changed it for added insurance, so I could sleep better.

It still only gets changed about once a year.
__________________
[FONT=Comic Sans MS][COLOR=red]"I wanna go fast!!"[/COLOR][/FONT]
[FONT=Comic Sans MS][COLOR=#ff0000]-- Ricky Bobby[/COLOR][/FONT]
lbszr is offline   Reply With Quote
Old 01-23-2010   #9
Pete
 
Pete's Avatar
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

Quote:
Originally Posted by Polo-1 View Post
Had Redline, it foamed out and was all over under the car. This was from high speed run 150+ for 10 miles.

Used the BMW shifting was smoother, from Redline. No foam out.

The last in it is, Amsoil Synchromesh. No high speed runs yet. shifter feels same or smoother then BMW.

Kevin,you needed to add Redline Anti-foamer

I have bought a bunch of old GM stuff i'm still using.

I've tried the Castrol in cold temps shifter was a little notchy.

Pete
__________________
'91 #1635 PoloGreen 350 LT5
11.09 @ 129.27
11.04 @ 128.86
474RWHP 400RWTQ
http://www.youtube.com/watch?v=SFNFOhGGlR4
http://www.youtube.com/watch?v=ZlRIOMwaDYY
https://sites.google.com/site/peteszr1garage
Pete is offline   Reply With Quote
Old 01-23-2010   #10
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: BMW motor oil Castrol TWS 10w-60 (synthetic) BMW P/N : 07-51-0-009-420 Opinions?

Quote:
Originally Posted by Pete View Post
Kevin,you needed to add Redline Anti-foamer

I have bought a bunch of old GM stuff i'm still using.

I've tried the Castrol in cold temps shifter was a little notchy.

Pete
Shifter will tend to be notchy when Castrol is cold but that goes away as trans oil heats up.
XfireZ51 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020