|
10-21-2009
|
#41 | |
|
Join Date: May 2009
Location: S Nevada
Posts: 352
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
Quote:
__________________
1995 Convertible Supercharged Auto 1974 454 550hp (avatar car) On the blocks- -Scharger install ! 1992-Zr-1 Sold. Watson Headers Ported Plenum, Housings Random tech cats Fidanza Flywheel Chipped, Relocated Mat Woods 165 stat Borlas, Straights 1996 Lt4 Sold 1994 Lt1 Sold 2004 Z06 Sold AKA** Illenema |
|
|
|
|
10-21-2009
|
#42 | |
|
Guest
Posts: n/a
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
Quote:
Spanky, glad you found your issue. I am sorry that I was not able to diagnos your car which is approximately 2,000 miles away. If it truely is a ECM connector issue it should have shown in doing random diagnostics. Sorry you were not able to relay that portion to me. On a misfire you will have a couple of issues that boils down to the problem. Installing new coils or injectors solves those problems at a rate of 99.9999999% |
|
|
|
|
10-21-2009
|
#43 |
|
Join Date: Jul 2009
Location: Springfield Missouri
Posts: 53
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
Jeff I thank you for your help, I was only mad you would not call me back or answer emails except to say you would call and never did, But no big deal you were doing a stranger a favor and I do thank you,
|
|
|
|
|
10-21-2009
|
#44 | |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
Quote:
Hey Spanky, I am curious on what parts you replaced that cost $2000
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
10-22-2009
|
#45 | |
 
Join Date: Feb 2006
Location: San Antonio area
Posts: 1,179
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
Quote:
__________________
“Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer |
|
|
|
|
|
10-22-2009
|
#46 |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
Yeah I was kinda wondering about that as I was not sure where the PCM was Im assuming the ECM as well. I heard those connecters can corrode as well as the connectors to the Quad drivers
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
10-22-2009
|
#47 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
I also have changed parts,taken parts off just to put them back on i did this a bunch of times,i lost count.
I have ported parts and reported parts. It's wierd everytime i take it down the track i have this silly grin on my face looks like this  It's all Chevrolet and Doug Rippies fault for making the Snake Skinner. I am so mad at them i can scream. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
10-22-2009
|
#48 |
|
Join Date: Jul 2009
Location: Springfield Missouri
Posts: 53
|
Re: 1 Cyl miss, out of ideas, might sell cheap..LOL
new parts list
Fuel pumps fuel filter Oxigen sensors both sides Accel Injectors New coils 2 sets of plugs and just for fun a new stereo and Nitto drag radials...LOL |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
