ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 10-16-2009   #1
SharkPilot
 
SharkPilot's Avatar
 
Join Date: Aug 2005
Location: Anaheim, California
Posts: 105
Default Starting question

There's nothing wrong I'm just curious about how this car starts up.

Most of the time it cranks about two seconds before it lights off and is running. There are other times, usually when it's hot, that it will crank just a bit longer. Then there are times that it cranks and starts almost immediately. Recently it sat in the garage for a week while I replaced half-shaft u-joints. When I started it for the first time it fired almost immediately, less than one second of cranking. That's not the only time it has started that quickly either.

I have read that the DIS ignition needs to get all of its ducks lined up before it will start firing sparks. I'm just curious about how variable it seems to be. The car has a Rippie chip and runs perfectly so this is more curiosity than anything else. It does always start so that's a great thing. It's driven nearly every day so lack of use isn't a factor. I also use Chevron fuel all of the time so it's not a question of different fuels.

Does anyone have any ideas why the cranking time can vary?
__________________
[CENTER][SIGPIC][/SIGPIC]
1991 ZR-1 #1135 Red/Red with both tops.
Stock except for an open topped K&N filter.[/CENTER]
SharkPilot is offline   Reply With Quote
Old 10-16-2009   #2
Jason 91
 
Jason 91's Avatar
 
Join Date: Mar 2006
Location: Denver, CO
Posts: 124
Default Re: Starting question

I have wondered the same. Sometimes after a month it seems to fire up right away and then other times the next day it will crank for a bit.

Everything I've read and heard tells me this is normal, but I still wonder.

Thanks,

Jason
__________________
1991 Quasar Blue ZR-1
Jason 91 is offline   Reply With Quote
Old 10-16-2009   #3
tomtom72
 
tomtom72's Avatar
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
Default Re: Starting question

This is how I understand our ignition system works on starting the motor......this is not gospel, only my meager grasp of the event

The DIS needs the crank signal and the cam signal and a reference signal to be fully operational. Number 6 has to be at TDC exhaust so that the DIS (?) knows that 1 is on TDC compression. That's the end of my knowledge of the events that are needed. If the DIS breaks I wonder if the car just stops or is there a limp home mode programed in somewhere?

Now I don't know how it all fits together, but all that has to line up correctly in order for the motor to fire up. Oh, one other thing that is a result of the "guy in the loading lot blowing up our 90 cams"....they designed back in the delay in the programing so we get some oil up top at the cams before the motor lights off.

Sorry that's all I can bring to the dance. But, we were the first vette NOT to have a distributor! No opti-spark for us!
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
tomtom72 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020