|
10-06-2009
|
#1 |
 
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Floor Coating Complete
Well, after a four day event (prep, bond coat, final coat, finish coat) I finially got my garage floor coated using the UCoat-It system. Some of my more serious cracks in the slab didn't conceal as completely as I had hoped but with you really have to look close to see them. I'll let you know in a few months how it is holding up.
Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
10-06-2009
|
#2 |
|
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
|
Re: Floor Coating Complete
Well Done Rich!
Doesn't the floor look a little bare? Is it not asking for a hydraulic..... 
|
|
|
|
|
10-06-2009
|
#3 |
Join Date: May 2007
Location: Westminster, Maryland
Posts: 3,689
|
Re: Floor Coating Complete
Your garage floor looks great Rich.
|
|
|
|
|
10-06-2009
|
#4 |
|
Guest
Posts: n/a
|
Re: Floor Coating Complete
Very nice ugrade for your man cave.=D> I wish I went with U Coat it too.
|
|
|
|
10-06-2009
|
#5 |
 
Join Date: Apr 2009
Location: Portland OR
Posts: 173
|
Re: Floor Coating Complete
I've been thinking about coating my floor. Let us know how it holds up...
|
|
|
|
|
10-06-2009
|
#6 |
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 939
|
Re: Floor Coating Complete
Rich...
Great to see..know you wanted to do this big time. Now you know what is next... weighs about 2000 lbs and has four legs  Make sure you use the clear plastic sheets under your tires for as long as you can...more cure time better the job. For the question of durability of the UCoatIt system... I did the install about 5 years ago and here is condition overview>>  And yes there are a few spots where the finish released....and I will repair that>> 
__________________
Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE] |
|
|
|
|
10-06-2009
|
#7 |
|
Banned
BANNED
Join Date: Oct 2006
Location: MD
Posts: 3,690
|
Re: Floor Coating Complete
Nicely done!
|
|
|
|
|
10-06-2009
|
#8 | |
|
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Floor Coating Complete
Quote:
 Plastic under the tires.....that a good suggestion, I didn't think of doing that. I put the clear coat on a bit thicker that yours, so hopefully it will fair better. Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
|
|
|
|
|
10-06-2009
|
#9 | |
|
Guest
Posts: n/a
|
Re: Floor Coating Complete
Quote:
I just helped a neighbor do his three car garage, lot of work, but fairly easy. |
|
|
|
|
10-07-2009
|
#10 |
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: Floor Coating Complete
That looks so sweeet Rich! I have a bad case of garage envy.... 
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
