Half Shaft Mystery - Page 2 - ZR-1 Net Registry Forums

ZR1Vette · 05-02-2009

1990 #622 was the switch over from steel to aluminum. Maybe prior owner switched from steel to aluminum (some have done that for "weight savings" and looks (no rust)

Scrrem · 05-02-2009

I have 1990 #608 and mine are steel.

Rich

Quote:

Originally Posted by Kevin

Mark,
For some reason the number 165 is stuck in my head as the change over for half shafts. enjoy the car

WVZR-1 · 05-02-2009

Quote:

my question is : is there a chance these alum. half shafts were intalled at the factory on such an early car, or have they been replaced? It seems very strange that they would be replaced with such low mileage. I found the following part numbers on stickers on the shafts: right side 14041925 - AR8??3, left side 14041925 - AR5033.

The part # is/was a "production" shaft used for very early C4's. It has "service/replacement" applications in early parts catalogs for '84 MY only. I would have guessed the AR5033 to be a date code and my thought would have been '85 33'd day of year. The AR8??3 though would seem to disprove that. It's I believe though very safe to assume they're "replacements" and not '90 MY production parts.

Here's a thought for you! The car left on a "test drive" with the "steel" and returned with the "aluminum"!! More difficult "swaps" have been accomplished!!

WB9MCW · 05-02-2009

FNG90-195 Congrats and welcome to the Zoo.

FNG90-195 · 05-02-2009

I appreciate everyone's input. The test drive/swap theory has got me thinking. So now my question is, are the aluminun half shafts I have now, that are from an early C-4, strong enough to stand a beating from a ZR-1? And if someone had an earlier C-4 with these aluminum shafts in it, would there be any reason for them to prefer the steel half shafts?

Also, anyone out there have a set of used steel half shafts for sale? If there are some around, what kind of $ do they usually sell for?

Won't sleep well tonight thinking about this one. All opinions welcome and appreciated.

Mark

tccrab · 05-03-2009

Jim VanDorn said in post #7 that he might have a set upstairs at his Pirate Lair.
Drop him an email, see if he's interested in parting with them.

TomC
"Crabs"

FNG90-195 · 05-04-2009

Thanks Tom. I'll give Jim a shout.

Mark

05-02-2009	#11
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: Half Shaft Mystery 1990 #622 was the switch over from steel to aluminum. Maybe prior owner switched from steel to aluminum (some have done that for "weight savings" and looks (no rust) __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

05-02-2009	#14
WB9MCW Join Date: Dec 2003 Location: McHenry, Il. Posts: 6,607	Re: Half Shaft Mystery FNG90-195 Congrats and welcome to the Zoo. __________________ http://i119.photobucket.com/albums/o...9mcw/SIG-2.jpg http://i119.photobucket.com/albums/o128/wb9mcw/vcm.gif "The Budget should be balanced, the Treasury should be refilled, public debt should be reduced, the arrogance of officialdom should be tempered and controlled, and the assistance to foreign lands should be curtailed, lest Rome will become bankrupt. People must again learn to work instead of living on public assistance." - Cicero, 55 BC " We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution." - Abraham Lincoln

05-02-2009	#15
FNG90-195 Join Date: Apr 2009 Location: Aurora, Ont. Can. Posts: 21	Re: Half Shaft Mystery I appreciate everyone's input. The test drive/swap theory has got me thinking. So now my question is, are the aluminun half shafts I have now, that are from an early C-4, strong enough to stand a beating from a ZR-1? And if someone had an earlier C-4 with these aluminum shafts in it, would there be any reason for them to prefer the steel half shafts? Also, anyone out there have a set of used steel half shafts for sale? If there are some around, what kind of $ do they usually sell for? Won't sleep well tonight thinking about this one. All opinions welcome and appreciated. Mark

05-03-2009	#16
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,654	Re: Half Shaft Mystery Jim VanDorn said in post #7 that he might have a set upstairs at his Pirate Lair. Drop him an email, see if he's interested in parting with them. TomC "Crabs" __________________ TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B]

05-04-2009	#17
FNG90-195 Join Date: Apr 2009 Location: Aurora, Ont. Can. Posts: 21	Re: Half Shaft Mystery Thanks Tom. I'll give Jim a shout. Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode