Outer window seals - ZR-1 Net Registry Forums

tomtom72 · 03-10-2009

http://www.corvetterecycling.com/198...p/sealpair.htm

Just got this in my e-mail this morning so I figured to pass it on to the BOB. CorvetteRecycling is having a sale on some NOS stuff. They have GM outer window seals at a rediculous price, like 43.00 for a pair!!!

I apologize to the administration if this post is out of bounds. I'm not trying to be a shill for these guys. It's just that I think these are NLA from GM.

Tom

GOLDCYLON · 03-10-2009

Tom you are not out of line being a great American and sharing what deals are out there. A word of caution to my fellow forum mates. These little buggers work so well that they can cause your power window motors to not have enough power to power the window back up. A lot of masseging is required and kneading of the metal strip within to flatten it somewhat. Also these fit into the top of the door panel and during the process they tend to seperate from the pop rivets GM placed in the top of the door panel. Suggest using stainless bolts with large washers behind the door panel to prevent pull through and tearing and cracking of the plastic in the panel behind the vinyl. Ask me how I know.

Also FYI CR offered a great deal on window felt stops for set of four. Really helps with the rattling and futher preventing of the etching of lines into the glasswork. Your mileage may vary. GC

Z51JEFF · 03-13-2009

I got a set of these as well as new window regulators.The regs were $200 shipped to my door for both.These are $350 apiece at the vendors.

GOLDCYLON · 03-13-2009

I bought a pair of motors and regulators also from CR. Great prices and GM equipment.

JThomas · 03-13-2009

TomTom72:

Thanks for the information. Ordered a set. Received them in original GM wrappers!

VetteMed · 03-13-2009

Ordered a pair today! Thanks for the heads up!

03-10-2009	#1
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Outer window seals http://www.corvetterecycling.com/198...p/sealpair.htm Just got this in my e-mail this morning so I figured to pass it on to the BOB. CorvetteRecycling is having a sale on some NOS stuff. They have GM outer window seals at a rediculous price, like 43.00 for a pair!!! I apologize to the administration if this post is out of bounds. I'm not trying to be a shill for these guys. It's just that I think these are NLA from GM. Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

03-10-2009	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Outer window seals Tom you are not out of line being a great American and sharing what deals are out there. A word of caution to my fellow forum mates. These little buggers work so well that they can cause your power window motors to not have enough power to power the window back up. A lot of masseging is required and kneading of the metal strip within to flatten it somewhat. Also these fit into the top of the door panel and during the process they tend to seperate from the pop rivets GM placed in the top of the door panel. Suggest using stainless bolts with large washers behind the door panel to prevent pull through and tearing and cracking of the plastic in the panel behind the vinyl. Ask me how I know. Also FYI CR offered a great deal on window felt stops for set of four. Really helps with the rattling and futher preventing of the etching of lines into the glasswork. Your mileage may vary. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

03-13-2009	#3
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,079	Re: Outer window seals I got a set of these as well as new window regulators.The regs were $200 shipped to my door for both.These are $350 apiece at the vendors.

03-13-2009	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Outer window seals I bought a pair of motors and regulators also from CR. Great prices and GM equipment. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

03-13-2009	#5
JThomas Join Date: May 2008 Location: Okemos, MI. Posts: 1,191	Re: Outer window seals TomTom72: Thanks for the information. Ordered a set. Received them in original GM wrappers! __________________ Joe Thomas Corvette Club of Michigan NCRS-Michigan Chapter Member NCM Master Ambassador NCM Lifetime Member Former NCM Board Member 1991 ZR-1 Melon Copper Metallic/Black 1992 ZR-1 Bright Red/Black (Sold) 1995 ZR-1 Bright Aqua/Gray (Sold) 2012 ZR1 Super Sonic Blue / Dark Titanium Last edited by JThomas; 03-27-2009 at 11:41 AM. Reason: Purchased Item Direct

03-13-2009	#6
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,828	Re: Outer window seals Ordered a pair today! Thanks for the heads up!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode