what the zr1 was meant to do - Page 2 - ZR-1 Net Registry Forums

ZR1 MK · 08-29-2005

Thanks for the compliments.
Talk to Mike at www.acsvette.com for any plenum work.
Those are bleeder screws on the coolant pipes. I have the stock bleeding system removed to reduce intake temps. The bleeder screws get used during coolant changes. It will operate the same as the original.
The steering wheel is an OMP Targa.

A1990 · 09-29-2005

I have always liked that picture =D>

95ZR1#418 · 10-25-2005

Why do your rims look as though they stick out ~1"' beyound the tires? It looks like the tires are too small for the wheels.

ZR1 MK · 10-25-2005

The wheels and tires shown in that picture are CCW Classic and Goodyear Eagle racing slicks (not DOT type race tires). CCW wheels have a larger lip than most and the wheel width is Goodyears recommended size for those particular size tires.

95ZR1#418 · 10-25-2005

Quote:

Originally Posted by ZR1 MK

The wheels and tires shown in that picture are CCW Classic and Goodyear Eagle racing slicks (not DOT type race tires). CCW wheels have a larger lip than most and the wheel width is Goodyears recommended size for those particular size tires.

I figured they were some racing set-up, as if you'd be driving it with the wrong size-Oh Yea... That is a fine action pic...

08-29-2005	#11
ZR1 MK Join Date: Aug 2005 Location: NY Posts: 143	Thanks for the compliments. Talk to Mike at www.acsvette.com for any plenum work. Those are bleeder screws on the coolant pipes. I have the stock bleeding system removed to reduce intake temps. The bleeder screws get used during coolant changes. It will operate the same as the original. The steering wheel is an OMP Targa. __________________ Mike 427 cu in LT5 [URL="http://zr1mk.weebly.com"]http://zr1mk.weebly.com[/URL]

09-29-2005	#12
A1990 Join Date: Dec 2003 Location: Grand Island NE Posts: 1,512	Re: what the zr1 was meant to do I have always liked that picture =D> __________________ Dennis Fierstein 90 ZR-1 #2562 Atomic-Z ZR-1 Net Registry Chairman of the Board ZR-1 Net Registry Treasurer

10-25-2005	#13
95ZR1#418 Join Date: Jul 2005 Location: Western Montana, now Maryland Posts: 191	Re: what the zr1 was meant to do Why do your rims look as though they stick out ~1"' beyound the tires? It looks like the tires are too small for the wheels. __________________ Later-Bob :D [IMG]http://www.axoplasmic.com/800x600/toponzr1.jpg[/IMG][IMG]http://www.axoplasmic.com/800x600/topoffzr1.jpg[/IMG][URL="http://axoplasmic.com/AXOPLASMIC/ZR1.html"]My '95 ZR-1 Home Page[/URL]

10-25-2005	#14
ZR1 MK Join Date: Aug 2005 Location: NY Posts: 143	Re: what the zr1 was meant to do The wheels and tires shown in that picture are CCW Classic and Goodyear Eagle racing slicks (not DOT type race tires). CCW wheels have a larger lip than most and the wheel width is Goodyears recommended size for those particular size tires. __________________ Mike 427 cu in LT5 [URL="http://zr1mk.weebly.com"]http://zr1mk.weebly.com[/URL]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode