Engine Parts - ZR-1 Net Registry Forums

LGAFF · 10-04-2008

Looks like the prior owner of my block may not be able to locate the head bolts.....was wondering if any knows of sources or am I stuck with paying Kurt White $47 per bolt.

Also will be looking for coolant tubes and an air horn as I move forward.....may need to find head bolts first.

LGAFF
92 ZR1
#234

GOLDCYLON · 10-04-2008

Jeffvette maybe. Hes out of town at the moment I think although

Z51JEFF · 10-05-2008

How about the place that parted that black 91 on Fleabay a few weeks ago,they parted the whole car,literally.

A26B · 10-05-2008

Quote:

Originally Posted by Z51JEFF

How about the place that parted that black 91 on Fleabay a few weeks ago,they parted the whole car,literally.

Head bolts are supposed to be used once only, according to the General. Having said that, I know engines have been rebuilt using the same head bolts with no adverse effect.

I' ve probably got a set with special washers (need these too) laying around. PM me to discuss $ if you're interested.

karterdon · 10-05-2008

Head bolts are a stretch bolt - Never resuse them - Bad things can happen !! There is a reason why they are called stretch bolts and have a one time use.

Don Yoakem
91 #267 Dark Red Met.

LGAFF · 10-05-2008

I would tend to agree, but have noticed them re-used here on the forum. Is there a supplier for new?

By the way Don, had the 500CLK out this weekend, went to my class reunion in Decatur......took some backroads and the car is great the pull from 50-130+ was amazing, powerful yet smooth. I cannot imagine driving an AMG car, instead of having the AMG event at a delaership they really need to get it out somewhere you can truly drive the car. Good MPG also for a V8 ended up with 25MPG.

LGAFF
92 ZR1
#234

cuisinartvette · 10-05-2008

maybe we could get a larger bolt co to make some.

http://www.darlingbolt.com/

$47 per bolt

That is an absolute joke of a price I dont care how "rare" it is.
Time to get new ones made.

jm 2 cents.

10-05-2008

Lee, I'll give you a shout Tuesday when I return from Atlanta.

BTW, the bolts from GM were 56 bucks.

karterdon · 10-05-2008

Lee, Contact ARP Racing - They have all sorts of head bolts. THeir wed site even has a parts request form. 1.866/381-4618. These Guy's are the racing bolt fabricators - I bet they can help.

Don Yoakem
91-#267 Dark Red Met.

cuisinartvette · 10-06-2008

Quote:

Originally Posted by Jeffvette

Lee, I'll give you a shout Tuesday when I return from Atlanta.

BTW, the bolts from GM were 56 bucks.

Had no idea they were that much. Perhaps we should round up whatever torque to yield bolts these things use and get some new ones made so they can be reused. One less thing for everyone to worry about.

10-04-2008	#1
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Engine Parts Looks like the prior owner of my block may not be able to locate the head bolts.....was wondering if any knows of sources or am I stuck with paying Kurt White $47 per bolt. Also will be looking for coolant tubes and an air horn as I move forward.....may need to find head bolts first. LGAFF 92 ZR1 #234

10-05-2008	#3
Z51JEFF Join Date: Dec 2007 Location: Fremont, CA Posts: 3,093	Re: Engine Parts How about the place that parted that black 91 on Fleabay a few weeks ago,they parted the whole car,literally.

10-05-2008	#5
karterdon Join Date: Jan 2008 Location: Antioch, Illinois Posts: 129	Re: Engine Parts Head bolts are a stretch bolt - Never resuse them - Bad things can happen !! There is a reason why they are called stretch bolts and have a one time use. Don Yoakem 91 #267 Dark Red Met.

10-05-2008	#6
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,180	Re: Engine Parts I would tend to agree, but have noticed them re-used here on the forum. Is there a supplier for new? By the way Don, had the 500CLK out this weekend, went to my class reunion in Decatur......took some backroads and the car is great the pull from 50-130+ was amazing, powerful yet smooth. I cannot imagine driving an AMG car, instead of having the AMG event at a delaership they really need to get it out somewhere you can truly drive the car. Good MPG also for a V8 ended up with 25MPG. LGAFF 92 ZR1 #234

10-05-2008	#7
cuisinartvette Join Date: Aug 2005 Location: San Fernando Valley, CA. Posts: 896	Re: Engine Parts maybe we could get a larger bolt co to make some. http://www.darlingbolt.com/ $47 per bolt That is an absolute joke of a price I dont care how "rare" it is. Time to get new ones made. jm 2 cents.

10-04-2008	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,120	Re: Engine Parts Jeffvette maybe. Hes out of town at the moment I think although __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

10-05-2008	#8
Jeffvette Guest Posts: n/a	Re: Engine Parts Lee, I'll give you a shout Tuesday when I return from Atlanta. BTW, the bolts from GM were 56 bucks.

10-05-2008	#9
karterdon Join Date: Jan 2008 Location: Antioch, Illinois Posts: 129	Re: Engine Parts Lee, Contact ARP Racing - They have all sorts of head bolts. THeir wed site even has a parts request form. 1.866/381-4618. These Guy's are the racing bolt fabricators - I bet they can help. Don Yoakem 91-#267 Dark Red Met.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode