ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1s and ZR-1 Parts For Sale/Wanted

Reply
 
Thread Tools Display Modes
Old 07-06-2008   #1
Polo-1
 
Join Date: Sep 2005
Location: Washington
Posts: 955
Default Parting out 1991 ZR-1

Here is a small list. Ask if you need something that not listed yet. Motor and Trans are gone.

1991 ZR-1 LT5 Parts List Car was Red/Red with 61 k on it

Rear view Mirror $25-Goldcylon
Engine oil cooler…$25 -63vettezo6
Engine oil cooler hose….$150-Goldcylon
Air Cleaner Assembly with K&N..$65-Chris
Complete Dana 44 Conversion Kit…..$1800
Front Left sideTurn #16514491….$15-Goldcylon
Front Right side Turn#16514492….$15-Goldcylon
Rear side marker right#16508520..$15-Goldcylon
Rear side marker left#16508519..$15-Goldcylon
Front Fog/Turn left….$45
Front Fog/Turn right…$45
Reverse lights pair ………$25
Horns…..$15
A/C blend door#10158085….$10
Blower Motor……$15
Blower housing under dash…$40
Blower housing #52450785 engine side….$200 both parts-63vettezo6
Left and Right Gills panels……$40-DMark
Hood Latches……$25-1991ZR1
Hood Latch cables..$25
Accelerator pedal…..$20
Accelerator/cruise cables…….$25
Emergency Brake handle ……..$25
FX3 shock controller rear set…..$60-Chris
FX3 shock controller front set…….$60-kabnvtt
Rear shock pair…….$75-63vettezo6
FX3 seat switches…..$30-Goldcylon
FX3 computer…….$50-1991ZR1
Front shock pair(New)…..$150-63vettezo6
Upper Rad shroud(with stickers)…$50-63vettezo6
Coolant over flow……$10-dbriana
Vacuum ball….$5
Fan Assembly………..$75-Chris
Lower Rad shroud…..$10
Wiper motor……$10-xlr8nflorida
Front impact bumper………..$40
Rear Impact bumper (ZR1)……$75-Chris maybe
Rear bumper (no light/moldings)….$500-63vettez06
Master Brake cyl…………..$50
Battery tray………..$10
Upper coolant reservoir…..$15-dbriana
Clutch/brake pedals…..$15-Gustav(brake)
Cruise control bracket…..$10
Air pump Smog stuff…….$25-xlr8nflorida
Left head light assembly (w/motor)..$50-1991ZR1
Right head light assembly (w/motor)..$50-1991ZR1
Driver side mirror…$45
Passenger side mirror…$45-jerrydirks
Gas tank…..$25-Chris
Evap canister&lines….$25
Borla 2.5 (mid pipes gone)….$200-Chris
ECM bracket (small crack)….$5
Spare Tire Bag(bad zipper)….$25
Spare tire…………$25
Glove box tray(dash)…$5
Glove box door(dash)…$10-dbriana
Head Light module….$40-1991ZR1
Inside wire harness (from dash/fuse boxes 2/relays/FX3/doors/seats/ABS/tail lamps) this was $1147 new from GM no longer…..$400
A/C dash vents………$5 ea.-dbriana (left side only)-xlr8nflorida the rest of dash vents
Rear tail lights w housings …..$30-xlr8nflorida
Instrument panel (Canadian)…..$350
Head light switch…….$25
DIC panel……….$20-xlr8nflorida
Bose/CD and module ( unknown cond.)….. $75-webruke
A pillar moldings……$5ea
Power key switch/and bezel ( switch and bezel are epoxy together it works)…..$25-Goldcylon
Brake Booster ZR-1/PBR ( gone from GM)..$200
Rear cargo moldings ……..$5ea-dbriana (right side only)
Fuel door assembly…..$25-Falconfling
Steering wheel (no air bag)…$50-Ifogot who
Turn signal/wiper/cruise switch…$40 Jarvis
Seats w motors and rails (no rips)..$500 falconfling

The prices do not include shipping, I only charge what the shipping is( no extra ). So if you call it here it's yours.

Please keep it out here what you want, Im getting PMed crazy.
We can PM shipping and payment info.

Thanks Kevin

Last edited by Polo-1; 05-15-2011 at 05:56 PM.
Polo-1 is offline   Reply With Quote
Old 07-06-2008   #2
1991ZR1
 
Join Date: Sep 2005
Posts: 90
Default Re: Parting out 1991 ZR-1

I'm interested in the following

Hood latches
FX3 computer
Left headlight assembly
Right headlight assembly
Headlight module
Power key switch and bezel

Sending you a PM
1991ZR1 is offline   Reply With Quote
Old 07-06-2008   #3
Zr1 Destroyer
 
Zr1 Destroyer's Avatar
 
Join Date: Oct 2005
Location: Candy Apple...yUmMy
Posts: 1,137
Default Re: Parting out 1991 ZR-1

If the passenger side is considered the left side I'll take the left side headlight assembly w/motor!
Zr1 Destroyer is offline   Reply With Quote
Old 07-06-2008   #4
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Parting out 1991 ZR-1

I posted on the other forum at 156 pm as well and also sent you a PM


Ill take the switch and bezel ( Does it have a key?)

Also I want both the front left and right side marker lights

Also the rear side marker lights both sides

Does the FX3 switch include the harness

Please LMK Daryll
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 07-06-2008   #5
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Parting out 1991 ZR-1

Also can you send me a pic of the upper radiator shroud with stickers

goldcylon@cox.net


Thanks Daryll
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 07-06-2008   #6
Polo-1
 
Join Date: Sep 2005
Location: Washington
Posts: 955
Default Re: Parting out 1991 ZR-1

Lets see if this works, for pictures.

http://s7.photobucket.com/albums/y29...20ZR1%20Parts/
Polo-1 is offline   Reply With Quote
Old 07-06-2008   #7
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Parting out 1991 ZR-1

Works great polo. Ill stick with what I have listed do you take Paypal? Daryll


Ill take the switch and bezel ( Does it have a key?)

Also I want both the front left and right side marker turn signal lights

Also the rear side marker lights both sides

Does the FX3 switch include the harness
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 07-06-2008   #8
Polo-1
 
Join Date: Sep 2005
Location: Washington
Posts: 955
Default Re: Parting out 1991 ZR-1

Quote:
Originally Posted by 1991ZR1
I'm interested in the following

Hood latches
FX3 computer
Left headlight assembly
Right headlight assembly
Headlight module
Power key switch and bezel

Sending you a PM
Daryll, I think 1991 ZR1 is 1st on the power key/Bezel and head light assemblies.
You are 1st for FX3/seat switches and harness not cut. and all side markers.

NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....
Polo-1 is offline   Reply With Quote
Old 07-06-2008   #9
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Parting out 1991 ZR-1

Quote:
Originally Posted by Polo-1
Daryll, I think 1991 ZR1 is 1st on the power key/Bezel and head light assemblies.
You are 1st for FX3/seat switches and harness not cut. and all side markers.

NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....
Kevin Im not going to argue But I was the first on the other forum to post in both the for sale section and the ZR-1 section for the parts I requested. Whatever you think is fair if the your telling me only the front and rear side markers and the FX-3 and seat switches with harness is availalbe I can live with that too bro. Send me a total and a paypal address. IF you deem Im worthy for the switch I will take that too. To make this clean LMK. Daryll


http://forums.*************.com/show...post1566196278

First to Post with the same list


http://forums.*************.com/show....php?t=2071343

First to post again about the same list
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 07-06-2008 at 08:55 PM.
GOLDCYLON is offline   Reply With Quote
Old 07-06-2008   #10
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Parting out 1991 ZR-1

Quote:
Originally Posted by Polo-1
NO WIRING WAS CUT FROM THIS CAR... All finger nails inplace, thank JeffVette for that.....

LOL ok I will I think I owe him a beer or too as well What will you need for shipping

Im at $90 for the front and rear side marker lights and the FX3 switches with harness. I do not want the radiator shroud. Maybe the oil cooler lines if they are still available? Is the radio bezel surround avail

Does the AC condensor come with all the ac lines as picd?
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 07-06-2008 at 09:27 PM.
GOLDCYLON is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020