|
03-24-2008
|
#11 |
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 930
|
Re: Here is 1990 #566
Hi Pete...
For the 'Power Plate' you can get at Mid America Motorsports>> http://www.mamotorworks.com/corvette-3-54-1054.html The throttle body "plate" actually replaces the OEM plate and is not a add on badge... but it is a beautiful piece of machining and is not hard to replace (just be carefull about removing the OEM plate so as not to damage the gasket). Here is a thread I started on the plate replacement DIY>> http://www.zr1netregistry.com/forum/...ight=carter200 In that thread you will note plate source (Carter).. Michael |
|
|
|
03-24-2008
|
#12 |
 
Join Date: Dec 2007
Location: Madrid, Spain (Europe)
Posts: 55
|
Re: Here is 1990 #566
Thank you very much for you help Michael
 Does Carter still sell those plates? I thought all ZR-1's had that factory part installed but now I've realized it's some kind of beautiful add-on  I already ordered the 'power plate' but I'd like to replace the ashtray & lighter cap itself, the painting is faded and I think it's not a good idea to stick the plate on a bad looking cover  Do you where to find one? 
Last edited by EuroPete; 03-24-2008 at 10:50 AM. |
|
|
|
|
03-24-2008
|
#13 |
|
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 930
|
Re: Here is 1990 #566
I would start with Ecklers>>>
http://www.ecklers.com/search.asp?ac...insert%22+%3B+ |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
