WTB: 94-95 Radio Bezel

[HAWAIIZR-1]

Power or valet key.

[HAWAIIZR-1]

Originally Posted by Jcsws6

Looking for a 94/95 radio bezel with switch. Please let me know if have one available.

Just curious why you asked for these parts and no response? Thanks.

[HAWAIIZR-1]

The flaws.

[Jcsws6]

Originally Posted by HAWAIIZR-1

Just curious why you asked for these parts and no response? Thanks.

Hey Craig, I didn?t catch your reply but sent you a message.

[HAWAIIZR-1]

Originally Posted by Jcsws6

Hey Craig, I didn?t catch your reply but sent you a message.

Sorry, no message from you yet. I think the bezel is sold and I forgot to bring the switch with my unexpected departure to Hawaii.

[HAWAIIZR-1]

All, the bezel is sold. Thank you for your interest.


Sent from my iPhone using ZR-1 Net Registry

[-=Jeff=-]

Originally Posted by Jcsws6

I dash/interior swapped a 90 so I still have the "full engine power" light.

How far did you go with the dash swap meaning, how much did you have to swap?

[aafc]

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.ph...pictureid=4572
You may have to click on zr1.net/forum to see
John

[HAWAIIZR-1]

Originally Posted by aafc

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.ph...pictureid=4572
You may have to click on zr1.net/forum to see
John

Hey John, I like your power key on info. I remember yours and I almost did something funny as you did. The 90s are easy to mod from a stock bezel, but the late model is a little more challenging with the huge switch and light hole, but I managed to build a support in the back for the switch. It?s not purdy, but can?t be seen.

[Jcsws6]

Originally Posted by aafc

When i installed the 4l8OE trans ,i did not want to cut the stock radio bezzel.
I found a good 1990 stock one and modified it to install the power key.
At a swap I sold the 1990 ZR-1 radio bezel to another ZR-1 owner.

https://www.zr1.net/forum/picture.ph...pictureid=4572
You may have to click on zr1.net/forum to see
John

That?s awesome! I?m actually pretty close to finishing my own as well, thanks for sharing!