|
08-02-2024
|
#1 |
|
Join Date: Oct 2018
Location: Indiana
Posts: 61
|
Oil Cooler Lines
Anyone repairing the hydraulic crimps on the oil line coolers. Long story short, I purchased a 14K mile car that has been driven. Lots of little stuff to make it the driver it needs to be. I like keeping most stuff on the car ZR-1 or hipo. I have owned two previous Z and never had any issues with these lines. I see that the GM line is discontinued and just curious to see if anyone repairing the lines. I see Jerry has replacement lines but I would prefer stock (or stock appearing) for this repair. Any help appreciated! Thanks
|
|
|
|
08-04-2024
|
#2 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Oil Cooler Lines
In industry flex hoses are generally considered to age limited. Our cars are now pushing 30+ years. Given that more and more oil cooler line failures are to be expected. The OEM lines were not the best quality available at the time. Therefore I would stay away from any used or NOS lines at this point. Suggest trying a local hydraulic shop to see if they can reproduce a set of new lines that appear like OEMs.
Sent from my iPhone using ZR-1 Net Registry
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
08-04-2024
|
#3 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Oil Cooler Lines
I have what I believe to be OEM or the Gm replacement lines that aren't leaking yet..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
