what shock setting? - ZR-1 Net Registry Forums

the mex · 03-12-2008

is best for drag racing?it seems like it wheelhops more on the touring than performance

bradslt5 · 03-12-2008

TRY SETTING IT IN THE MIDDLE AND POP THE FRONT SWAY BAR BOLTS

the mex · 03-12-2008

i havn't tried that setting yet.i will do both next time at the track with it.this weekend its my cobra's turn at the track.im hoping low 11's or high 10's from it.

bradslt5 · 03-12-2008

what year is the cobra 03-04 . they are fun cars also . have fun

the mex · 03-12-2008

Quote:

Originally Posted by bradslt5

what year is the cobra 03-04 . they are fun cars also . have fun

no,its a 95 pushrod car with a built engine/trans/rear and a bot of nitrous.

bradslt5 · 03-13-2008

pushrod motor ,my kind of guy .i have a 68 coupe with an fps377 witha california transmissons(art carr)fully rolleredc4-with a gearvendors od. currie 9in with fiberglass mono leaf rear springs. and 3 in diamond plate stabale pkg in the very back of the trunk. car has run 10.81 @124.25 ,mph all motor . i get teased by my buddies as having an identity crisis.. what the heck a fast car is cool no matter what it is , at least to me . and the 68 is a wild ride on the big end

bradslt5 · 03-13-2008

i have been brainstorming with friends and we just tried to out somekybs on the rear . we did it on our little area that we use our g-techs onand improved on the 60ft by.15 and the et by .25. we think the car squatts too much with the bilteins . and causes some aero drag top end . car seems to hit alot harder on the line .just something to think aBOUT . A REMINDER YOU MIGHT WANT TO PULL THE 1/2 SHAFTS AND PEEK AT THE U JOINTS .YOU REALLY DONT WANT ONE CUTTINLOOSE . I PUT IN SUPER SPICERS IN MINE . dont get the ones with zerks it weakens them. have a great timeat ther strip.

03-12-2008	#1
the mex Join Date: Feb 2008 Location: okc.ok Posts: 30	what shock setting? is best for drag racing?it seems like it wheelhops more on the touring than performance

03-12-2008	#2
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: what shock setting? TRY SETTING IT IN THE MIDDLE AND POP THE FRONT SWAY BAR BOLTS

03-12-2008	#3
the mex Join Date: Feb 2008 Location: okc.ok Posts: 30	Re: what shock setting? i havn't tried that setting yet.i will do both next time at the track with it.this weekend its my cobra's turn at the track.im hoping low 11's or high 10's from it.

03-12-2008	#4
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: what shock setting? what year is the cobra 03-04 . they are fun cars also . have fun

03-13-2008	#6
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: what shock setting? pushrod motor ,my kind of guy .i have a 68 coupe with an fps377 witha california transmissons(art carr)fully rolleredc4-with a gearvendors od. currie 9in with fiberglass mono leaf rear springs. and 3 in diamond plate stabale pkg in the very back of the trunk. car has run 10.81 @124.25 ,mph all motor . i get teased by my buddies as having an identity crisis.. what the heck a fast car is cool no matter what it is , at least to me . and the 68 is a wild ride on the big end

03-13-2008	#7
bradslt5 Join Date: Oct 2007 Location: lone pine and mammoth lakes ca. Posts: 544	Re: what shock setting? i have been brainstorming with friends and we just tried to out somekybs on the rear . we did it on our little area that we use our g-techs onand improved on the 60ft by.15 and the et by .25. we think the car squatts too much with the bilteins . and causes some aero drag top end . car seems to hit alot harder on the line .just something to think aBOUT . A REMINDER YOU MIGHT WANT TO PULL THE 1/2 SHAFTS AND PEEK AT THE U JOINTS .YOU REALLY DONT WANT ONE CUTTINLOOSE . I PUT IN SUPER SPICERS IN MINE . dont get the ones with zerks it weakens them. have a great timeat ther strip.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode