ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 09-21-2023   #1
kizner00
 
Join Date: Sep 2023
Location: PA
Posts: 4
Default Need Help Please

I have a 1995 ZR1 lined up to buy and just want to be sure it has original engine and trans.
the guy texted me pics of the trans vin 1S5800264 and the last digits end in the same number as cars VIN 800264. As for the engine vin he gave me 10ZUDX309280006, doesnt match and the registry mentions Merc 93 was 10ZVC.

is there supposed to be a derivative engine vin ending in build number???
thank you in advance for a NOOB and hopefully a ZR1 owner...
kizner00 is offline   Reply With Quote
Old 09-21-2023   #2
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,094
Default Re: Need Help Please

I posted this in another thread on engine numbers (https://www.zr1.net/forum/showthread...=engine+number) --Bob


Here are a couple of pictures of the VIN and engine number on the block. The VIN "409" is lightly stamped and just barely visible above the number "11". The larger engine picture shows the location of the VIN stamp pad; it is in the lower left of the picture, on the passenger side at the rear. The engine number is on the opposite side of the block. Hope that helps.--Bob
Attached Images
File Type: jpg 95Engine (1a).jpg (118.5 KB, 33 views)
File Type: jpg 95Engine (1).jpg (150.6 KB, 40 views)
File Type: jpg 95Engine (1b).jpg (129.4 KB, 39 views)
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 09-21-2023   #3
kizner00
 
Join Date: Sep 2023
Location: PA
Posts: 4
Default Re: Need Help Please

Thanks Warp Ten. so i have seen all these pics in forum and for some reason, i cant open them now, hahaha.
in any event, the big question is the Engine VIN supposed to end as the same as Car VIN.
it sure appears no from what he supplied.
kizner00 is offline   Reply With Quote
Old 09-23-2023   #4
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,094
Default Re: Need Help Please

Quote:
Originally Posted by kizner00 View Post
Thanks Warp Ten. so i have seen all these pics in forum and for some reason, i cant open them now, hahaha.
in any event, the big question is the Engine VIN supposed to end as the same as Car VIN.
it sure appears no from what he supplied.
Here is an enlarged picture of the VIN stamp pad that shows a better, but not perfect, look at the VIN. You can see that it does indeed include the last 8 digits of my '95's VIN, "S5800409". You can see the location of the stamp pad in the picture above of the engine with the heads off. Here is a closeup picture of that as well. I believe the other numbers under the VIN are the date of manufacture, October 23, 1993 and its number in the production sequence for that day, 11. --Bob
Attached Images
File Type: jpg 95Engine (1aa).JPG (213.1 KB, 36 views)
File Type: jpg 95Engine (1bb).JPG (73.7 KB, 31 views)
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"

Last edited by WARP TEN; 09-23-2023 at 01:10 PM.
WARP TEN is offline   Reply With Quote
Old 09-23-2023   #5
kizner00
 
Join Date: Sep 2023
Location: PA
Posts: 4
Default Re: Need Help Please

thank you very much. the guy did find it and texted it to me matching. The bad news is when i drove 4.5 hrs today to look at the car, the clear coat had major runs all thru it and the guys said GM had bad paint that year. wow. this guy waisted 9 hrs of my time.
back to the search and thank you very much for the info, at least now i know where to look.
take care!!
kizner00 is offline   Reply With Quote
Old 09-23-2023   #6
phrogs
 
phrogs's Avatar
 
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,753
Default Re: Need Help Please

GM had bad paint at times but not with clear coat runs.
__________________
JOHNNY P

Currently own

90 ZR-1 #845 DRM 500 engine package

90 #226 Parts car Hit me up if you need anything.
phrogs is offline   Reply With Quote
Old 09-24-2023   #7
kizner00
 
Join Date: Sep 2023
Location: PA
Posts: 4
Default Re: Need Help Please

I should have taken pictures. These were giant dollar bill size clear coat runs on roof sides and quarter and door, it was just a horrible repaint. This clearly(no punn intended) didn't come off 68k GM line and not sure how much was paid to do it but i'd ask for my money back!!
Dude should be ashamed not disclosing this and making me drive 4.5 hrs each way for this junk!!
just emailed about another black one with 11k, gonna set up and go see this one!!

appreciate all the info guys!!
kizner00 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020