|
07-15-2021
|
#11 |
 Join Date: Oct 2020
Location: Coweta, Georgia
Posts: 53
|
Re: Cam Cover Installation Question
Hey guys,
I got the cam covers back on the car; however, a week has gone by and I noticed that the excess sealant around the edges is still tacky. Is this normal? |
|
|
|
07-15-2021
|
#12 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Cam Cover Installation Question
Yes. PermaBond A136 is an anaerobic sealant, meaning it only cures in the absence of air. Obviously, the sealant visible around the edges is in contact with air and is not cured, as it should be.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
07-15-2021
|
#13 |
|
Join Date: Oct 2020
Location: Coweta, Georgia
Posts: 53
|
Re: Cam Cover Installation Question
Thanks for the quick reply! and sorry just read your other post earlier in the thread about it being anaerobic
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
