|
04-14-2021
|
#1 |
Join Date: Dec 2006
Location: Paris Texas
Posts: 182
|
93 Zr1 Clutch Slave Cyl
I need to replace or rebuild the clutch slave cylinder on my 93 ZR1. Looking for input from others as to what they have done. I would prefer buying American made parts if possible. Your input would be most appreciated. Thanks Ellis
|
|
|
|
04-14-2021
|
#2 |
|
Join Date: Sep 2018
Location: Florida
Posts: 305
|
Re: 93 Zr1 Clutch Slave Cyl
Someone may be holding onto a NOS part that you could buy. Another option is to reach out to Bill Bourdeau as he used to rebuild the masters but possibly the slave as well.
http://www.zfdoc.com/ Zip Corvette has this as a replacement. Appears to be the steel version with the skinny mounting flange and not a cast iron replacement. https://www.zip-corvette.com/91-96-c...kaAjz3EALw_wcB |
|
|
|
|
04-14-2021
|
#3 |
|
Join Date: Dec 2006
Location: Paris Texas
Posts: 182
|
Re: 93 Zr1 Clutch Slave Cyl
Thank you. I will contact ZFDoc
|
|
|
|
|
04-21-2021
|
#4 |
  
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: 93 Zr1 Clutch Slave Cyl
Rock Auto carries the cast iron clutch slave cylinders you want.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
