|
06-03-2018
|
#11 |
 Join Date: Jun 2015
Location: Texas
Posts: 530
|
Re: Going to dyno this Sunday
His numbers seem similar to mine, I pulled 383 whp with API Intake, Headers, no cats, X-pipe, Borla, and Henderson chip. Ambient temp was about 50F during the dyno. I am not the original owner so I don't know if anything else was done prior to my ownership.
|
|
|
|
06-03-2018
|
#12 | |
Join Date: Jul 2016
Location: Bloomington, MN
Posts: 127
|
Re: Going to dyno this Sunday
Quote:
Sent from my XT1710-02 using Tapatalk
__________________
1991 ZR-1 #520 Arctic White/Gray |
|
|
|
|
|
06-03-2018
|
#13 |
|
Join Date: Aug 2015
Location: Magnolia, Texas
Posts: 884
|
Re: Going to dyno this Sunday
Mine is a '91 also. Will be porting plenum and injector housings and port matching heads next. Then re-tune again. Should give me about the same improvement I saw with the headers and tune first go around. Will have my new business set up by second week in September, so will get base curve on our Dyno before swapping to ported top end and re-tuning.
Sent from my XT1585 using ZR-1 Net Registry mobile app |
|
|
|
|
06-04-2018
|
#14 |
|
Join Date: Jan 2017
Location: US
Posts: 233
|
Re: Going to dyno this Sunday
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
