Poly Bushings - ZR-1 Net Registry Forums

32valvZ · 05-25-2018

Looking at doing the rears... Is there a company that has the graphite impregnated type? What have you guys used that you like and that dont squeak?
Thanks!

A26B · 05-25-2018

I understand that at the BG C4 Gathering last week, Ridetech now offers the Delrin bushings for the C4 ZR-1. They don't appear on the website yet, so you will need to call. Let us know how this turns out for you.

spork2367 · 05-25-2018

Be forewarned, for those who don't know, delrin (acetal) is much stiffer and will have a much harsher ride than polyurethane bushings.

Jagdpanzer · 05-25-2018

Here’s a good article on the subject:
http://www.superchevy.com/how-to/cha...your-corvette/

I’ve been running ES black PolyGraphite bushings for the past six years with no squeaking issues. They ride somewhat harsher than the stock rubber bushings. Be sure to liberally apply the recommended lubricant to all the moving surfaces. When finished wipe down the outer surfaces with a solvent rag to reduce attracting dust and dirt.

Ronstar · 05-25-2018

I have the Banski rear suspension. Love it

05-25-2018	#1
32valvZ Join Date: Nov 2007 Location: Sunshine State Posts: 1,071	Poly Bushings Looking at doing the rears... Is there a company that has the graphite impregnated type? What have you guys used that you like and that dont squeak? Thanks! __________________ [B]1990 #2815[/B] [COLOR="Red"][B]Red/Red[/B][/COLOR] Ported Plenum & IH (by Pete) Haibeck Chip Rebuilt FPR (by Phil) FIC Injectors Watson LT Headers 3" Stainless Works exhaust Lingenfelter Open Air Lid Bill B Built Transmission Shifter & C Beam Plates [FONT=Impact][COLOR=red]1992 [COLOR=black]#[/COLOR] 091[/COLOR][/FONT] [FONT=Impact][COLOR=#ff0000]Red/[COLOR=silver]Gray[/COLOR][/COLOR][/FONT] [B]SOLD[/B]

05-25-2018	#2
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: Poly Bushings I understand that at the BG C4 Gathering last week, Ridetech now offers the Delrin bushings for the C4 ZR-1. They don't appear on the website yet, so you will need to call. Let us know how this turns out for you. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

05-25-2018	#3
spork2367 Join Date: Jun 2013 Location: PA Posts: 879	Re: Poly Bushings Be forewarned, for those who don't know, delrin (acetal) is much stiffer and will have a much harsher ride than polyurethane bushings.

05-25-2018	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: Poly Bushings Here’s a good article on the subject: http://www.superchevy.com/how-to/cha...your-corvette/ I’ve been running ES black PolyGraphite bushings for the past six years with no squeaking issues. They ride somewhat harsher than the stock rubber bushings. Be sure to liberally apply the recommended lubricant to all the moving surfaces. When finished wipe down the outer surfaces with a solvent rag to reduce attracting dust and dirt. __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

05-25-2018	#5
Ronstar Join Date: Jul 2012 Location: Michigan Posts: 182	Re: Poly Bushings I have the Banski rear suspension. Love it __________________ Ron Thompson 1990 421ci ZR-1 2010 ZR1 (stock)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode