ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 12-01-2017   #1
TX '90 ZR1
 
TX '90 ZR1's Avatar
 
Join Date: Oct 2017
Location: TX
Posts: 2,038
Question Oil Leak Ideas. Help!!

The '90 I got just a few weeks ago has a small oil leak. I knew it was there, but had no idea I would have so much trouble finding for sure where it is coming from. Doesn't leak hardly enough to worry about. About 2 drops hit the floor after driving it a lot or a little. Can start the car and just move it in the shop and you get the 2 drops.
Drips from the passenger rear side of the oil pan. Seems to be coming from the rear of engine up high. Have checked all the normal stuff. Oil lines, senders, pan bolts, etc.
I can see a little fresh oil between the middle intake runners on the drivers side, but none towards the front or rear. Nor the passenger side.
Think it may be something under the plenum?
If it is, why do I get the same 2 drops no matter how long I run it?
I am open to suggestions.
Thanks Guys !!
TX '90 ZR1 is offline   Reply With Quote
Old 12-01-2017   #2
garyhugo
 
garyhugo's Avatar
 
Join Date: Feb 2010
Location: Jacksonville,FL
Posts: 242
Default Re: Oil Leak Ideas. Help!!

Oil pressure switch is my first guess.It's under the oil filter and hard to see. The switch itself will leak just a little where you are speaking of.Not to be confused with the oil pressure sensor.The switch is what lights the oil warning light, the sensor works the gauge.
Hope this helps.
__________________
Gary
90-1572
garyhugo is offline   Reply With Quote
Old 12-02-2017   #3
Ccmano
 
Ccmano's Avatar
 
Join Date: Jun 2006
Location: Sparks, NV
Posts: 2,852
Default Re: Oil Leak Ideas. Help!!

The attached article will walk you through the usual oil leak suspects. Sounds like you may have a breather box leak under the plenum, however judging from your description it may be the stud for the passenger side exhaust manifold. Oil has a funny way of coming out at places that don’t necessarily correspond to where the leak actually is.
Good luck,
H


http://www.zr1specialist.com/HAT%20W...0the%20LT5.pdf
__________________
90'ZR-1 #1461 Red/Black
Ported Intake, Degreed Cams, OBX Headers & Exhaust, Fidanza FW, Secondary Delete, Custom tune, C6 GS Wheels. Sold
08 C6 Z51 Crystal Red Metallic Sold Vararam Intake, Tune, Sold
05 C6 Z51 Red/Black Sold
90'ZR-1 #1723 Black/Gray Sold but not forgotten
91' Z51 L98 White Vert. My First, you always remember your first. Sold.
Ccmano is offline   Reply With Quote
Old 12-02-2017   #4
TX '90 ZR1
 
TX '90 ZR1's Avatar
 
Join Date: Oct 2017
Location: TX
Posts: 2,038
Default Re: Oil Leak Ideas. Help!!

Thanks garyhugo & Ccmano !!
I checked the oil pressure switch under the filter. Not there.
From reading the article by Marc I am inclined to think I may have 2 leaks. I am going to check the bolts on the oil pressure regulator cover and the PVC grommet. They are in close proximity to where the oil might be coming from.
By the way, this forum is GREAT. Always get informative, knowledgable responses.
I REALLY APPRECIATE IT !!
Maybe I can return the favors sometime.
Thanks again.
TX '90 ZR1 is offline   Reply With Quote
Old 12-03-2017   #5
tiegsd
 
tiegsd's Avatar
 
Join Date: Jul 2017
Location: West Chester, PA
Posts: 378
Default Re: Oil Leak Ideas. Help!!

Quote:
Originally Posted by Ccmano View Post
The attached article will walk you through the usual oil leak suspects. Sounds like you may have a breather box leak under the plenum, however judging from your description it may be the stud for the passenger side exhaust manifold. Oil has a funny way of coming out at places that don’t necessarily correspond to where the leak actually is.
Good luck,
H


http://www.zr1specialist.com/HAT%20W...0the%20LT5.pdf
Have a few small oil seeps myself I need to go hunting for. Thanks for the tips!
tiegsd is offline   Reply With Quote
Old 12-03-2017   #6
Jitse
 
Join Date: Aug 2013
Location: Holland
Posts: 80
Default Re: Oil Leak Ideas. Help!!

Searching for leakages, personally I start with (proper) cleaning the engine. Searching for leakages is much easier then, it helps when you use a mirror and a torch, an videoscope can be handy too. And start it up...
Jitse is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020