Thermostat Installation - ZR-1 Net Registry Forums

Jetjock · 10-31-2017

For those of you that have replaced the thermostat on the LT5, how did you get the thermostat to stay in place while postioning the the housing back on? Thanks!

GOLDCYLON · 10-31-2017

Same as cliff... it's also easier to attach the short hose to the top of the thermostat housing and the radiator before attempting reassembly.

Here are some other tricks. Note the arrow or notch in the replacement thermostat as that is the direction the thermostat needs to face towards the radiator. Also the backside of the housing bolts are threaded through so you can shoot some PB lube on the backside of the bolts before attempting to loosen the bolts as they are prone to snapping. GC

ssrszz4 · 11-01-2017

I used a little bit of super glue it worked great.

Sent from my XT1585 using ZR-1 Net Registry mobile app

Jetjock · 11-01-2017

Thanks. The problem, that I am having, is the thermostat still popping out of position even though I used the putty knife. It leaked like a sieve. Tomorrow, I will use some permatex on it and see how that works. I did this long ago and did not have any problems.

Which bolt goes into the bracket - the short one or the long one?

Jetjock · 11-01-2017

Nevermind. I just answered my own question.

10-31-2017	#1
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 554	Thermostat Installation For those of you that have replaced the thermostat on the LT5, how did you get the thermostat to stay in place while postioning the the housing back on? Thanks! __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

10-31-2017	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Thermostat Installation Same as cliff... it's also easier to attach the short hose to the top of the thermostat housing and the radiator before attempting reassembly. Here are some other tricks. Note the arrow or notch in the replacement thermostat as that is the direction the thermostat needs to face towards the radiator. Also the backside of the housing bolts are threaded through so you can shoot some PB lube on the backside of the bolts before attempting to loosen the bolts as they are prone to snapping. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

11-01-2017	#3
ssrszz4 Join Date: Jan 2017 Location: US Posts: 233	Re: Thermostat Installation I used a little bit of super glue it worked great. Sent from my XT1585 using ZR-1 Net Registry mobile app

11-01-2017	#4
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 554	Re: Thermostat Installation Thanks. The problem, that I am having, is the thermostat still popping out of position even though I used the putty knife. It leaked like a sieve. Tomorrow, I will use some permatex on it and see how that works. I did this long ago and did not have any problems. Which bolt goes into the bracket - the short one or the long one? __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

11-01-2017	#5
Jetjock Join Date: Mar 2008 Location: Auburn, KY Posts: 554	Re: Thermostat Installation Nevermind. I just answered my own question. __________________ Roy L. Carman If I feel the need for speed, I just think about flying the B-777. 1989 Dk Blue Coupe lost in divorce 1991 Black Coupe SOLD 1992 Black ZR-1 #423 SOLD! 1993 Ruby Red 40th Anniversary ZR-1 #334 1995 Black ZR-1 taken by ex-wife 2002 Pewter Coupe no idea where it is 2003 50th Anniversary Corvette #No idea what number SOLD! ZR-1 Net Registry #516 Grand Sport Lifetime Member NCM Lifetime #1468 ZR-1 Net Registry Board Secretary

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode