TB removal and then some!!!

[Roadster]

first coat...

second, third and fourth coats...


so far the final coat...the finished plenum...I don't think it will need anymore coats of paint...

[gtcollins@maxnet.co.nz]

Originally Posted by Roadster

first coat...

second, third and fourth coats...


so far the final coat...the finished plenum...I don't thing it will need anymore coats of paint...

Hi Tom it's looking good what's sort of paint are you using
Glen

Sent from my SM-G930F using ZR-1 Net Registry mobile app

[Roadster]

Originally Posted by gtcollins@maxnet.co.nz

Hi Tom it's looking good what's sort of paint are you using
Glen

Sent from my SM-G930F using ZR-1 Net Registry mobile app

Thanks Glen, got lucky with the new finish, I am happy with the results...

This is the paint that Cliff has used and recommended....I do like the color...

[S.hafsmo]

Looks great!
But now you'll have to the injector housings and heads to match.

[Roadster]

Originally Posted by S.hafsmo

Looks great!
But now you'll have to the injector housings and heads to match.

Thanks....
That's what you think!!! lol...

That is for another time, for this season will probably be the two-tone look!!!
I will repaint the air horn that I did a few months ago to match and the TB, once I go over it and get it done will also be painted to match. But the IH's and heads is going to be a much bigger job....

[S.hafsmo]

Originally Posted by Roadster

Thanks....
That's what you think!!! lol...

That is for another time, for this season will probably be the two-tone look!!!
I will repaint the air horn that I did a few months ago to match and the TB, once I go over it and get it done will also be painted to match. But the IH's and heads is going to be a much bigger job....

I was at least hoping you would.
My LT5 need a fresh coat of paint quite badly. It has lots of darkened "stains" that cannot be cleaned. You take good pictures and provide useful info, so if you did it first, it would make my job a lot easier.

Are there no clears that won't yellow over time?

[Roadster]

Originally Posted by gtcollins@maxnet.co.nz

Hi Tom
You can assemble and get the car going then if you wish you can do them later

Sent from my SM-G930F using ZR-1 Net Registry mobile app

Glen, that is probably what I will do....just have too much going on right now, I have been neglecting the 74 and need to devote 3 days this week to get caught up..still have to put the heater box back together and get installed, along with the long list I still have to do...

Originally Posted by carter200

Tom,
Looks great! I would clear it but that is me.....

Thanks Carter, will have to do some research on high temp clear, and see if there is such a product. But it does look good now the way it is.....

Originally Posted by S.hafsmo

I was at least hoping you would.
My LT5 need a fresh coat of paint quite badly. It has lots of darkened "stains" that cannot be cleaned. You take good pictures and provide useful info, so if you did it first, it would make my job a lot easier.

Are there no clears that won't yellow over time?

I hear you there!!! Mine had some dark stains on it also, but the first time I did the paint I did not sand anything down. I just used mineral spirits and really wiped it clean over and over again. As you can see from the first paint job, it did come out good. But as mentioned above I did sand down the entire plenum this time around. And again, not saying my methods are the end all be all, but they work for me.
Appreciate that you are liking the pics and find the info useful. Thanks...
And anything I can do making your job easier is a plus.....lol
All I can say is that when you do this, just take your time, as it is time consuming to say the least. But the results are well worth it....

Will be looking into the clears....

[Roadster]

Did some research into clears today and came up with the following link...

https://www.kbs-coatings.com/DiamondFinish-Clear.html

And made in the

You my have heard of this company and their products. I read all of the info and reviews of this product and others that have very good to excellent reviews. Also can be spray on aluminum, which is a big plus for us with no adverse results. This one seems to be easier to use and doesn't require to release or mix an activator to spray. Just spray on and your done. It also is available in a satin finish, but I went for the high gloss finish which both are available in spray cans.
As usual the above is JMO and may give you another option if you are thinking about using clear.

This product is also available on Amazon and you get free shipping if you have Prime. It is also available directly from kbs-coatings and other suppliers as well.
Might be something to think about, especially if your undecided.

[Flyman 27]

That looks really good, nice job!

[Roadster]

Originally Posted by Flyman 27

That looks really good, nice job!

Thanks.....appreciated....