|
03-27-2017
|
#11 |
|
Join Date: Feb 2011
Location: Salinas, Ca
Posts: 160
|
Re: Cam Timing Pins
Interested in a set also, price?
|
|
|
|
03-30-2017
|
#12 |
|
Join Date: Mar 2017
Location: Dallas
Posts: 22
|
Re: Cam Timing Pins
Just curious, but how much play is there? The original GM pins can move as much as 6 degrees after they have been pinned. You always had to plan on that when timing the cams and the force exerted on the cam bolts when you tightened them down. You may have thought you had the perfect 110/116 timing but when you checked them no telling where the timing ended up.
|
|
|
|
|
03-30-2017
|
#13 | |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Cam Timing Pins
Quote:
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
|
03-30-2017
|
#14 |
|
Join Date: Mar 2017
Location: Dallas
Posts: 22
|
Re: Cam Timing Pins
Don't tell anyone... It's a secret... Yeah, we need a beer.
|
|
|
|
|
03-31-2017
|
#15 |
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Cam Timing Pins
Hi Jim, glad to see you back on here.
I learned everything I needed know about cam timing from your write up. http://www.zr1netregistry.com/Information/TechNet/[AllArticles]/tabid/262/articleType/ArticleView/articleId/212/LT5-Cam-Timing.aspx
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake Last edited by Jagdpanzer; 03-31-2017 at 12:43 AM. |
|
|
|
|
03-31-2017
|
#16 |
|
Join Date: Mar 2017
Location: Dallas
Posts: 22
|
Re: Cam Timing Pins
Hows that square engine treating you?
 I hope everything is going well and the car still scares you.
|
|
|
|
|
03-31-2017
|
#17 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
|
Re: Cam Timing Pins
The 4x4 was a rocket but had to come out for the original stock motor in order to get through the tough emission inspections we enjoy in Northern Virginia. This time it will go back in as a 427 using the 4" stroker crank again and this time with 4.125" bore liners and pistons which should give it a little more giddy up. As you Texans are fond of saying "to much is never enough"
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
04-14-2017
|
#18 |
 Join Date: Oct 2013
Location: Spokane Valley, WA
Posts: 115
|
Re: Cam Timing Pins
Phil,
Count me in for a set too. Perfect timing as I have the engine out of my '91 for a rebuild, 160k miles. Tony |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
