|
03-27-2016
|
#1 |
 Join Date: Oct 2004
Posts: 1,884
|
WTB 3.07 differential (assembled?) What have you?
I'd like to have a D44HD 3.07 and thought I'd start the search here. This is for a project and I guess $$$'s are very dependent upon what's available and the condition if known.
#'s from the ring gear, the pinion and the case would be very helpful. Since there are no "notifications" any longer I'd appreciate an email. There should be one available for me. I don't get here near as often as I used to so PM's? I'll try to get back daily to check Notifications if they worked would be swell - Oh well! Thanks -Dave |
|
|
|
03-27-2016
|
#2 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,165
|
Re: WTB 3.07 differential (assembled?) What have you?
I have a 3.07 ring and pinion for a Dana 44
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
03-28-2016
|
#3 | |
|
Join Date: Oct 2004
Posts: 1,884
|
Re: WTB 3.07 differential (assembled?) What have you?
Quote:
|
|
|
|
|
|
03-28-2016
|
#4 |
Join Date: Jan 2004
Location: Murrieta, CA
Posts: 240
|
Re: WTB 3.07 differential (assembled?) What have you?
Dave
I have a Dana 44 but it has 4.10s in it. Approximately 500 miles on it when it was removed and inspected. I also run 307 gears in mine as a daily driver and find it works just fine for the kind of driving I like to do.  What are you putting 3.07s in?
__________________
91 ZR-1 #661 Watsons, 3" exhaust, Borlas... Hurst, 4.11s, Samco, RD radiator, gel coated motor... turquise / black |
|
|
|
|
03-28-2016
|
#5 | |
|
Join Date: Oct 2004
Posts: 1,884
|
Re: WTB 3.07 differential (assembled?) What have you?
Quote:
Cobra kit car 2200 lb LS7 TKO600RR |
|
|
|
|
|
03-29-2016
|
#6 | |
|
Join Date: Jan 2004
Location: Murrieta, CA
Posts: 240
|
Re: WTB 3.07 differential (assembled?) What have you?
Quote:
__________________
91 ZR-1 #661 Watsons, 3" exhaust, Borlas... Hurst, 4.11s, Samco, RD radiator, gel coated motor... turquise / black |
|
|
|
|
|
03-31-2016
|
#7 |
|
Join Date: Oct 2004
Posts: 1,884
|
Re: WTB 3.07 differential (assembled?) What have you?
Well I've not been able to do an "assembled" differential but I have an NOS housing, the correct case (new) but wanted to do this maybe less expensively for the fellow.
Anyone with a used housing? A used that had previous issues at the c-beam pass-through for attachment might do well here. I don't know how this is bolted into the project but I'm sure there's no c-beam. I've used a few with issues in the past for resto-builds and all was well. If you've any sort of D44 housing drop me an email. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
