Secondary Indicator Light?

[BlackZR1]

Originally Posted by Dynomite

Use a Needle rather than a paper clip in your case....or sharpen the paper clip on a grinder.
I modified that link as I learn something new every day
Secondary Functional Test and Reconditioning the Secondary Actuators TIPS
Verifying Secondary Operation with Plenum In Place.

Cliff,

The pin worked. For those watching it helps to use a multimeter to verify 12v on the pink wire with key on (before grounding it for the test) to insure contact to the conductor is made. I had to wiggle the pin a bit until I made good contact.

Results: Good news, both secondary vacuum solenoids cycled within about 1 second and the vac. pump cycled a bit longer.

After a drive my air intake duct tends to pull off the air cleaner housing so that gives me another indicator that I am pulling some serious air. I have a new silicone duct from Jerry on the shelf ready to go on

Roger