WTB an ECM - ZR-1 Net Registry Forums

vilant · 08-30-2015

Hi All,
Haven't been around for awhile, from 10/1/14 til the end of this July, every moment of my free time has been completing a major home improvement. Exterior is 100%, still finishing up the inside. Anyway, I had nagging issue with my ECM, kept getting a Code 31. Did everything I could do to repair it, the last thing to do was to send in my ECM for reconditioning. Just got the bad news a few days ago that my ECM is bad, has been reconditioned before, and more than likely will be unrepairable. I won't know for sure for a few more months as the place that does the rebuilds has a ton of backlogs, even then the outcome is bleak.
So, I have a 3900 lb paperweight in my garage. What really bums me out is I just bought a spare plenum and injector housing, had Pete port it to 36mm, and bought Marc's chip over the winter. Had big plans, but now it's dead in the water.

If any one has a spare ECM then can sell, please let me know, I'm desperate. My car is useless without one and will be, until I get a new one or an alternative is created.
Thanks, Joe

GOLDCYLON · 08-30-2015

Two sold in June on EBay. You need to grab em fast as they don't up for sale often.

vilant · 08-30-2015

I'm always leery of buying on eBay for several reasons. I tried one of those Cardone ECM's before from a chain store that are on there now for $200+. Can't remember exactly what happened but I know it didn't work. My ECM works with the exception of Code 31 popping on after a little bit and shutting down the secondaries. Very annoying, but the car runs fine, just 75hp less and probably not as gas efficient

GOLDCYLON · 08-30-2015

Quote:

Originally Posted by vilant

I'm always leery of buying on eBay for several reasons. I tried one of those Cardone ECM's before from a chain store that are on there now for $200+. Can't remember exactly what happened but I know it didn't work. My ECM works with the exception of Code 31 popping on after a little bit and shutting down the secondaries. Very annoying, but the car runs fine, just 75hp less and probably not as gas efficient

I understand your concerns. However this is the reality of owning a 25 year old car. Along with the DIS module these are the top two HTF parts for our car. We tend to have to be beggars when it comes to find these parts vs. choosers. This being the case we are better off finding one on a car part out that was known to be previously working as the NOS ones are long gone. Good luck in your search maybe a part out opportunity will come in the future if the seller is willing to part with it minus the engine. It is indeed frustrating. If we may ask where did you send your for rebuilding ? GC

Oh the other HTF parts? Oil pump, thermostat housing etc

vilant · 08-30-2015

Yea, I know, your right. I'll keep an eye out there, but unfortunately being in construction, I only have access to a computer when I'm home. Chances are it will disappear before I even see it. Going to check the salvage yards too. Hopefully, someone will let go of their spare, for the right price

Sent it to Jerry.

lfalzarano · 09-30-2015

Sorry the links don't come through, but copy and paste into your browser. These were recently posted.

http://bgshooters.com/?wpsc-product=...vette-zr-1-ecm

I bought mine from the above, but if not check these out...

http://www.ebay.com/itm/like/3205558...chn=ps&lpid=82 (Beware, the price is too low to be true)

http://www.egmcartech.com/store/Corv...790937925.html

http://www.ebay.com/itm/Engine-Contr...del%3ACorvette

Call these guys to confirm if their ECM is LT5 compatible

http://www.zip-corvette.com/catalog/...category/7752/

They offer the LT5 Memcal

http://www.zip-corvette.com/84-96-c4...year/1990.html

Good luck.

-=Jeff=- · 09-30-2015

Quote:

Originally Posted by lfalzarano

Sorry the links don't come through, but copy and paste into your browser. These were recently posted.

http://bgshooters.com/?wpsc-product=...vette-zr-1-ecm

I bought mine from the above, but if not check these out...

http://www.ebay.com/itm/like/3205558...chn=ps&lpid=82 (Beware, the price is too low to be true)

http://www.egmcartech.com/store/Corv...790937925.html

http://www.ebay.com/itm/Engine-Contr...del%3ACorvette

Call these guys to confirm if their ECM is LT5 compatible

http://www.zip-corvette.com/catalog/...category/7752/

They offer the LT5 Memcal

http://www.zip-corvette.com/84-96-c4...year/1990.html

Good luck.

Those eBay links are for the L98 ECM

GOLDCYLON · 09-30-2015

Quote:

Originally Posted by -=Jeff=-

Those eBay links are for the L98 ECM

Yep

vilant · 09-30-2015

I actually bought another ZR-1, lol. High miles and in rough shape but the ECM is original and works perfect (for now). Was going to take some unobtainium parts for myself then part the rest out. But it's already sold to another member minus some parts I want. It was a one owner all original w/ 85,000 mi. It saved my car and is going to save someone else's as well.

A26B · 10-01-2015

Well plug that puppy in and lets see if it solves your problem!!

08-30-2015	#1
vilant Join Date: Jun 2012 Location: PA Posts: 772	WTB an ECM Hi All, Haven't been around for awhile, from 10/1/14 til the end of this July, every moment of my free time has been completing a major home improvement. Exterior is 100%, still finishing up the inside. Anyway, I had nagging issue with my ECM, kept getting a Code 31. Did everything I could do to repair it, the last thing to do was to send in my ECM for reconditioning. Just got the bad news a few days ago that my ECM is bad, has been reconditioned before, and more than likely will be unrepairable. I won't know for sure for a few more months as the place that does the rebuilds has a ton of backlogs, even then the outcome is bleak. So, I have a 3900 lb paperweight in my garage. What really bums me out is I just bought a spare plenum and injector housing, had Pete port it to 36mm, and bought Marc's chip over the winter. Had big plans, but now it's dead in the water. If any one has a spare ECM then can sell, please let me know, I'm desperate. My car is useless without one and will be, until I get a new one or an alternative is created. Thanks, Joe __________________ Joe 1990 Bright Red ZR-1 #2599

08-30-2015	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: WTB an ECM Two sold in June on EBay. You need to grab em fast as they don't up for sale often. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 08-30-2015 at 02:31 PM.

08-30-2015	#3
vilant Join Date: Jun 2012 Location: PA Posts: 772	Re: WTB an ECM I'm always leery of buying on eBay for several reasons. I tried one of those Cardone ECM's before from a chain store that are on there now for $200+. Can't remember exactly what happened but I know it didn't work. My ECM works with the exception of Code 31 popping on after a little bit and shutting down the secondaries. Very annoying, but the car runs fine, just 75hp less and probably not as gas efficient __________________ Joe 1990 Bright Red ZR-1 #2599

08-30-2015	#5
vilant Join Date: Jun 2012 Location: PA Posts: 772	Re: WTB an ECM Yea, I know, your right. I'll keep an eye out there, but unfortunately being in construction, I only have access to a computer when I'm home. Chances are it will disappear before I even see it. Going to check the salvage yards too. Hopefully, someone will let go of their spare, for the right price Sent it to Jerry. __________________ Joe 1990 Bright Red ZR-1 #2599

09-30-2015	#6
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: WTB an ECM Sorry the links don't come through, but copy and paste into your browser. These were recently posted. http://bgshooters.com/?wpsc-product=...vette-zr-1-ecm I bought mine from the above, but if not check these out... http://www.ebay.com/itm/like/3205558...chn=ps&lpid=82 (Beware, the price is too low to be true) http://www.egmcartech.com/store/Corv...790937925.html http://www.ebay.com/itm/Engine-Contr...del%3ACorvette Call these guys to confirm if their ECM is LT5 compatible http://www.zip-corvette.com/catalog/...category/7752/ They offer the LT5 Memcal http://www.zip-corvette.com/84-96-c4...year/1990.html Good luck.

09-30-2015	#9
vilant Join Date: Jun 2012 Location: PA Posts: 772	Re: WTB an ECM I actually bought another ZR-1, lol. High miles and in rough shape but the ECM is original and works perfect (for now). Was going to take some unobtainium parts for myself then part the rest out. But it's already sold to another member minus some parts I want. It was a one owner all original w/ 85,000 mi. It saved my car and is going to save someone else's as well. __________________ Joe 1990 Bright Red ZR-1 #2599

10-01-2015	#10
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	Re: WTB an ECM Well plug that puppy in and lets see if it solves your problem!! __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode