|
02-07-2015
|
#3 |
 
Join Date: Dec 2003
Location: Arcadia, OK
Posts: 3,402
|
Re: L98 pressure plate?
The original pressure plate for the ZR-1/LT5 is 3,000 lbf and the L98 is 2,800 lbf.
As Dynomite stated, DO NOT use the ZR-1 LT5 pressure plate bolts with the L88 pressure plate, they are too long. Get the correct bolts and it should be fine for your style of driving, Or, re-use your ZR-1/LT5 pressure plate with the new disc.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode