|
08-03-2014
|
#1 |
|
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 454
|
FIC stainless injectors - primary vs secondary
OK so I've started the reassembly process and find the secondary injectors don't "snap" into place like the primaries do. I lubed the lower o-ring made concentric circles to get them in place trying not to distort the lower blue o-ring. Problem is they don't feel seated, they just sort of wobble around in there - like the o-ring hasn't reached the bottom lip on the IH.
Normal? Thanks, - Jeff |
|
|
|
08-03-2014
|
#2 |
|
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 454
|
Re: FIC stainless injectors - primary vs secondary
Well I guess that's just how it is - lower/small o-ring doesn't "seat", nothing to see here!
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
