ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 05-02-2014   #11
Z06scentair
 
Z06scentair's Avatar
 
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
Default Re: Major Problems!

That was the next step....nobody around curently. The mall is still open
Z06scentair is offline   Reply With Quote
Old 05-02-2014   #12
Z06scentair
 
Z06scentair's Avatar
 
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
Default Re: Major Problems!

Quote:
Originally Posted by -=Jeff=- View Post
Gear is not high enough out of the cup... Spec is in the FSM (factory service manual)
Spot on Jeff!

The nut was not torqued to specification! Once torqued to spec the gear was engaged to the actuator.

The SRC light went out prior to even cranking the car!

Thanks guys......it appears the only problem was "the loose nut between the seat and steering wheel"
Z06scentair is offline   Reply With Quote
Old 05-04-2014   #13
Z06scentair
 
Z06scentair's Avatar
 
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
Default Re: Major Problems!

Went for a drive and within 2 miles the code 31 came back. It goes out once the ignition is on then comes back on once it has a couple of miles logged.
Z06scentair is offline   Reply With Quote
Old 05-04-2014   #14
We Gone
 
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,170
Default Re: Major Problems!

Just a thought.

You may want to swap the actuator with the other side, if the code moves with it you know that the problem is the actuator.
__________________
Steve



1990 Steel Blue/Black #2355
1990 Red/Red #1473
1991 Quasar /Black #118 Sold
1991 Turquoise/Black #766 Parted Out
1993 Yellow/White #179 Sold
1990 Black/Gray #1361 Headers/4:10s Sold
We Gone is offline   Reply With Quote
Old 05-05-2014   #15
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: Major Problems!

Forgive me for high jacking this thread but my question pertains to the OP's topic...At some point will these Bilstein's need replacing just due to age? Mine are now 20 years old but have less than 40k miles on them. At what point does the age become more of a factor than the miles?
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Old 05-05-2014   #16
Z06scentair
 
Z06scentair's Avatar
 
Join Date: Sep 2013
Location: Charlotte NC
Posts: 655
Default Re: Major Problems!

Quote:
Originally Posted by Fully Vetted View Post
Forgive me for high jacking this thread but my question pertains to the OP's topic...At some point will these Bilstein's need replacing just due to age? Mine are now 20 years old but have less than 40k miles on them. At what point does the age become more of a factor than the miles?

My car has 20k miles and know for a fact the front two shocks have been replaced already.

With that said, I would bet the age dictates failure mode.
Z06scentair is offline   Reply With Quote
Old 05-05-2014   #17
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Major Problems!

double check that the actuator is fully seated in the cup and the retainer clip is also seated on all 3 sections
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978

Last edited by -=Jeff=-; 05-05-2014 at 09:30 AM.
-=Jeff=- is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020