![]() |
#1 |
Join Date: Jul 2013
Location: Alabama
Posts: 59
|
![]()
Where is the passenger side sensor mounted? About to tackle it. Thanks
|
![]() |
![]() |
![]() |
#2 |
![]() Join Date: Sep 2013
Location: Charlotte NC
Posts: 654
|
![]()
Its under the blower fan assembly on the frame rail.....should be in the same location as the driver side you have already fixed, except the passenger side of the car.
![]() It's doable little tougher to get to because something is mounted to the firewall just above it. It's been a month since I tackled it so can't remember exactly. Look up and under with a flash light you will see it. |
![]() |
![]() |
![]() |
#3 |
Join Date: Jul 2013
Location: Alabama
Posts: 59
|
![]()
I see the bugger. Can you leave blower motor in place?
|
![]() |
![]() |
![]() |
#4 |
![]() Join Date: Sep 2013
Location: Charlotte NC
Posts: 654
|
![]()
Yes it is actually under the heater core box........no need to remove anything other than.....rocker panel, side panel and inner fender skirts. I removed all three for cleaning while I was there.
|
![]() |
![]() |
![]() |
#5 |
Join Date: Jul 2013
Location: Alabama
Posts: 59
|
![]()
Ok I'm in reassembly now.
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Sep 2013
Location: Charlotte NC
Posts: 654
|
![]() |
![]() |
![]() |
![]() |
#7 |
Join Date: Jul 2013
Location: Alabama
Posts: 59
|
![]()
I'm done. Cleared code. But it comes back as 26. Now what?
|
![]() |
![]() |
![]() |
#8 |
![]() Join Date: Sep 2013
Location: Charlotte NC
Posts: 654
|
![]()
It could be a bad sensor.........just a thought maybe someone else will chime in.
|
![]() |
![]() |
![]() |
#9 |
Join Date: Jul 2013
Location: Alabama
Posts: 59
|
![]()
That was my first thought as well. Any way to test these things?
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Oct 2004
Posts: 1,884
|
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|