04-14-2013 | #11 |
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: Gage Cluster
My Canadian export 95 has the annoying DRL. what is the easist way to eliminate this system?
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
04-14-2013 | #12 |
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
|
Re: Gage Cluster
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
04-14-2013 | #13 |
Join Date: Oct 2004
Posts: 1,889
|
Re: Gage Cluster
Seems like quite a price to pay for a 100 Ohm resistor. I'm quite confident the sensor is looking for 100 Ohm and I mentioned that in my post earlier. I'd need to "root around" for some documentation but I'm sure it should be very straight forward.
** I recall when kits to add the DRL function were $60 or so. I couldn't quite get a grip on that! Last edited by WVZR-1; 04-14-2013 at 08:05 PM. |
04-14-2013 | #14 |
Join Date: Jul 2004
Location: Sudbury, Ontario. Canada
Posts: 1,538
|
Re: Gage Cluster
If you want to add DRL but don't like running the headlights up try here:
http://www.webelectricproducts.com/ You're right WV it's a bit pricey for a resistor but I guess you're paying for the convenience. I don't use either of these, I just found them when I was looking around and sharing info. I run with the headlights down and the driving lights on (manual) - works for me. Dave
__________________
1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff |
04-14-2013 | #15 |
Join Date: Nov 2011
Location: Saskatoon Canada
Posts: 47
|
Re: Gage Cluster
When I safetied my 91 last year they required DRL. I used the kit from Corvette Central that turns the signals on. Works good. Only took 10 minutes to install.
__________________
1991 ZR-1 #1158 Dark Red Metallic/Saddle 1993 LT-1 White/Red Guts SOLD 1986 L98 4+3 Red/Grey SOLD |
04-15-2013 | #16 |
Join Date: Dec 2012
Location: NC
Posts: 1,786
|
Re: Gage Cluster
Got a snappic of the hardware and installation?
__________________
I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG] |
04-15-2013 | #17 |
Join Date: Nov 2011
Location: Saskatoon Canada
Posts: 47
|
Re: Gage Cluster
Sorry no pics. Corvette Central part # 494087. Costs $50.00. Ties into the big harness along the frame rail drivers side. The instructions tell you which wires to tap into. Easy install.
__________________
1991 ZR-1 #1158 Dark Red Metallic/Saddle 1993 LT-1 White/Red Guts SOLD 1986 L98 4+3 Red/Grey SOLD |
Thread Tools | |
Display Modes | |
|
|