Flowmaster and Chip Installed - ZR-1 Net Registry Forums

Hammer · 03-06-2007

Hey everyone,

I installed the Flowmaster #17115 Cat Back and a Haibeck standard chip this weekend. I am quite happy with the performance and am looking forward to hitting the strip to see what he'll do now. Seat of the pants tells me the car drives better and is a little crisper on the throttle now. There is no resonance from the exhaust except way low in the power band, around 1200 rpm when climbing a small hill is all I noticed. There is a real nice sound when on the throttle and it is quiet at idle.

The system cost $569.95 @ Summit Racing and there is an extra $6.00 shipping fee along with a $10.95 handling fee. I took advantage of those fees and also ordered a new serpentine belt and exhaust wrapping for the system.

We Gone · 03-06-2007

Same set-up here..going to the dyno on Sat to see what the gains are...Was 326rwhp bone stock @ about 18K miles in 02 now has 43K miles should be about broken in now

Steve

blackjack · 03-06-2007

cant wait to see your results

bj

DaveK · 03-06-2007

Congratulations John, glad you can see some improvement.

I plan on getting the chip from Haibecks too when I can, so its nice to get some feedback from someone who's done it. According to the previous owner mine has a Corsa exhaust which presumably is similar to the Flowmaster set up.

Lots planned, will have to take my time though.

tccrab · 03-06-2007

I just put a Haibeck prom and flowmaster mufflers on my '90 and I'm *VERY* happy.
My seat 'o pants dyno tells me the car is a bazillion times cooler and maybe smidge faster.
The prom was by far the best investment. My idle was never anywhere near 650, in fact it was all over the board, and it had cold start issues. I used to have to feather the throttle on cold start to keep it from loading up and dieing. Not any more. Turn the key, vrroom, 650 rpms.

Pull up to a stoplight, 650rpms.

It used to idle around 850-1100 at a stoplight.

The flows just add to the cool factor, not loud, definately deeper tone, maybe just a itsy bitsy, teeny tiny amount of resonance at about 1500 rpm, but heck, who runs a LT5 at 1500 rpm? From the back at idle it sounds kinda like a Ferrarri, kind of a "burbly" sound.

TomC

guinnessdood · 03-06-2007

Quote:

Originally Posted by Hammer

Hey everyone,

I installed the Flowmaster #17115 Cat Back and a Haibeck standard chip this weekend. I am quite happy with the operformance and am looking forward to hitting the strip to see what he'll do now. Seat of the pants tells me the car drives better and is a little crisper on the throttle now. There is no resonance from the exhaust except way low in the power band, around 1200 rpm when climbing a small hill is all I noticed. There is a real nice sound when on the throttle and it is quiet at idle.

The system cost $569.95 @ Summit Racing and there is an extra $6.00 shipping fee along with a $10.95 handling fee. I took advantage of those fees and also ordered a new serpentine belt and exhaust wrapping for the system.

Wanna race?

Much schweeter sound I'm sure...!

Uly

FU · 03-06-2007

The MOD bug commeth.
Lift iff the plenum and injector housings and get them done too

Demps · 03-06-2007

About time. Weather is getting better! Bet Firebird will be crowded on the first night. Ted

Hammer · 03-06-2007

Quote:

Originally Posted by Demps

About time. Weather is getting better! Bet Firebird will be crowded on the first night. Ted

I just sent an iCalender to you. I am thinking that will be the first time I'll get out there. Long ways away, but I can't see going on the T & T earlier that month. We'll talk before then.

Hammer · 03-06-2007

Quote:

Originally Posted by We Gone

Same set-up here..going to the dyno on Sat to see what the gains are...Was 326rwhp bone stock @ about 18K miles in 02 now has 43K miles should be about broken in now

Steve

Please be sure to post your results or send me a PM or email. I am quite anxious to see what they actually might have picked up. I am thinking, based on Marc's and Hib's posted numbers, that around 22 HP would be what we are shooting for. The TQ and HP curves should be way better though.

03-06-2007	#2
We Gone Join Date: Apr 2004 Location: ATL. GA. Posts: 2,170	Re: Flowmaster and Chip Installed Same set-up here..going to the dyno on Sat to see what the gains are...Was 326rwhp bone stock @ about 18K miles in 02 now has 43K miles should be about broken in now Steve __________________ Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold Last edited by We Gone; 03-06-2007 at 08:28 AM.

03-06-2007	#3
blackjack Join Date: Aug 2005 Location: north of montreal Posts: 510	Re: Flowmaster and Chip Installed cant wait to see your results bj

03-06-2007	#4
DaveK Join Date: Jul 2004 Location: Sudbury, Ontario. Canada Posts: 1,538	Re: Flowmaster and Chip Installed Congratulations John, glad you can see some improvement. I plan on getting the chip from Haibecks too when I can, so its nice to get some feedback from someone who's done it. According to the previous owner mine has a Corsa exhaust which presumably is similar to the Flowmaster set up. Lots planned, will have to take my time though. __________________ 1991 #1516 Black/Black davidmkelly.com "Speed is often confused with insight." - Johan Cruijff

03-06-2007	#5
tccrab Join Date: Oct 2004 Location: Folsom CA Posts: 1,654	Re: Flowmaster and Chip Installed I just put a Haibeck prom and flowmaster mufflers on my '90 and I'm *VERY* happy. My seat 'o pants dyno tells me the car is a bazillion times cooler and maybe smidge faster. The prom was by far the best investment. My idle was never anywhere near 650, in fact it was all over the board, and it had cold start issues. I used to have to feather the throttle on cold start to keep it from loading up and dieing. Not any more. Turn the key, vrroom, 650 rpms. Pull up to a stoplight, 650rpms. It used to idle around 850-1100 at a stoplight. The flows just add to the cool factor, not loud, definately deeper tone, maybe just a itsy bitsy, teeny tiny amount of resonance at about 1500 rpm, but heck, who runs a LT5 at 1500 rpm? From the back at idle it sounds kinda like a Ferrarri, kind of a "burbly" sound. TomC __________________ TomC '90ZR1 #792 Honorary Pirate [B]If it ain't FUN, you're doing something terribly WRONG. [/B]

03-06-2007	#7
FU Join Date: Mar 2004 Location: Found Member Posts: 4,346	Re: Flowmaster and Chip Installed The MOD bug commeth. Lift iff the plenum and injector housings and get them done too __________________ Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237

03-06-2007	#1
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	Flowmaster and Chip Installed Hey everyone, I installed the Flowmaster #17115 Cat Back and a Haibeck standard chip this weekend. I am quite happy with the performance and am looking forward to hitting the strip to see what he'll do now. Seat of the pants tells me the car drives better and is a little crisper on the throttle now. There is no resonance from the exhaust except way low in the power band, around 1200 rpm when climbing a small hill is all I noticed. There is a real nice sound when on the throttle and it is quiet at idle. The system cost $569.95 @ Summit Racing and there is an extra $6.00 shipping fee along with a $10.95 handling fee. I took advantage of those fees and also ordered a new serpentine belt and exhaust wrapping for the system. __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I] Last edited by Hammer; 04-04-2007 at 12:08 AM.

03-06-2007	#8
Demps Join Date: Jan 2006 Location: Niceville Posts: 998	Re: Flowmaster and Chip Installed About time. Weather is getting better! Bet Firebird will be crowded on the first night. Ted

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode