ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1s and ZR-1 Parts For Sale/Wanted

Reply
 
Thread Tools Display Modes
Old 02-13-2013   #21
Pete
 
Pete's Avatar
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
Default Re: A/O Engineering Forced Air Filler Plate

Quote:
Originally Posted by WVZR-1 View Post
Do you recall what you had those "narrowed" to? Do you recall what it would accept?

*** I remembered having one or two 8.5 GM A-mold wheels. It certainly looks like you could do most any width you desired. The Hoosier you mention looks like it might like a 5" and that looks doable. The barrel of the wheel has a bit of a taper so I'd guess a person would have to have the shop confirm the capabilities.

http://weldcraftwheels.com/index-2.html

I have done a few wheels with these guys,widenng/narrow.
I think those were done to 5"
I had bought those ready done.

Pete
__________________
'91 #1635 PoloGreen 350 LT5
11.09 @ 129.27
11.04 @ 128.86
474RWHP 400RWTQ
http://www.youtube.com/watch?v=SFNFOhGGlR4
http://www.youtube.com/watch?v=ZlRIOMwaDYY
https://sites.google.com/site/peteszr1garage

Last edited by Pete; 02-13-2013 at 01:12 PM.
Pete is offline   Reply With Quote
Old 02-13-2013   #22
WVZR-1
 
Join Date: Oct 2004
Posts: 1,890
Default Re: A/O Engineering Forced Air Filler Plate

Quote:
Originally Posted by Pete View Post
http://weldcraftwheels.com/index-2.html

I have done a few wheels with these guys,widenng/narrow.
I think those were done to 5"
I had bought those ready done.

Pete
I've sent a couple people to Weldcraft and have seen their results. I've never heard "bad"! They'd certainly be a first choice. I'm not looking to do any but it's an option to mention when I'm selling the 8.5" wheels I've got. I'm quite sure I've got a pair.
WVZR-1 is offline   Reply With Quote
Old 02-13-2013   #23
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: A/O Engineering Forced Air Filler Plate

Quote:
Originally Posted by WVZR-1 View Post
I've sent a couple people to Weldcraft and have seen their results. I've never heard "bad"! They'd certainly be a first choice. I'm not looking to do any but it's an option to mention when I'm selling the 8.5" wheels I've got. I'm quite sure I've got a pair.

If you dont I have a single 8.5 in the attic if needed to make a pair. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 02-14-2013   #24
Blue Flame Restorations
 
Blue Flame Restorations's Avatar
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
Default Re: A/O Engineering Forced Air Filler Plate

Quote:
Originally Posted by Fully Vetted View Post
I would call it something else. Wouldn't want any chance of a legal battle with AO. You could call it BFR Cold Air Intake.

I spoke to AO Engineering today. There are no plans to ever make this unit again. Just not enough demand.
__________________
1988 KOH Prototype EX5023 sold
1990 ZR-1 #444 Convertible
1990 ZR-1 Black #966
1991 ZR-1 Quazar Blue #296
1957 Duntov SS Project
Blue Flame Restorations is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020