02-11-2013 | #1 |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
315/35/17 BFG T/A g-Force Drag Radial 2?
I'm in the market for some drag radials, and saw these tires on "special" for a buck-88 at Tirerack. Anyone familiar with this tire? Comments?
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
02-11-2013 | #2 |
Join Date: Sep 2011
Location: TN
Posts: 581
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
Never used them but seems cheap enough.
|
02-11-2013 | #3 |
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
Paul, i have these and have been using them as my street/everyday tires not good in the rain at highway speeds.,but do stick pretty good.
The better choice for everyday driving on a drag radial is the Nitto. Nittos drive like a normal tire even highway speeds but need more heating time for good traction. Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
02-11-2013 | #4 |
Join Date: Jul 2010
Location: Woodstock, Ontario, Canada
Posts: 1,275
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
The BFG drag radials do stick well, but dont stand up to burnouts for long. The last set I used were a 325/60/15.
peace Hog |
02-11-2013 | #5 | |
Join Date: Jun 2009
Location: I live at Devens, one run at a time
Posts: 455
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
Quote:
(back to your regularly scheduled program) - Jeff
__________________
[I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I] |
|
02-11-2013 | #6 |
Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
very good price. I've used them and they are a good tire. I prefer the traction of the M&H or Hoosier for a pure race drag radial (for the track only) Hoosiers are just a little bit more than this price.
and definitely the Nitto is a better street tire. I'm going to try tne NT05R next and maybe just run on them full time as I don't travel in the ZR-1 as much and they would probably still be OK in the rain as long as you back the speeds way down. goal is to wear out a couple of pairs during a summer FYI, word of warning don't spend a long time at WOT for a sustained high speed run (a few min or more) as the drag radials can heat up and come. they are not speed rated and I wouldn't trust them for too long for a sustained high speed blast like at an ORR. flying mile or short runs are just fine. the BFGs would be "ok" on the street as long as you don't expect them to corner as well or run in the rain much. at the elevated power levels, driving on drag radials is so much fun it's pretty ez to get used to the compromise involved getting hooked up on the street during the summer I run on the hoosiers as long as I know it's not going to rain. puts the GY EMT run craps to shame. hooks WAY better and handles just fine.
__________________
95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP) |
02-11-2013 | #7 |
Join Date: Jun 2010
Location: back in lone pine
Posts: 591
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
i have used both and personally think the nitto nt05 is alot better . they are more stable at speed when using low pressures . i have better 60ft with the nitto, vs the mickey thompson and the bfgs , and dont have to take the pressures down to 15-6 to get them to hook .nittos like 21lbs .jmho
|
02-11-2013 | #8 |
Join Date: Jan 2004
Location: Alex VA
Posts: 1,087
|
Re: 315/35/17 BFG T/A g-Force Drag Radial 2?
have you tried the NT05R that is the drag radial
I'm debating the regular NT05 vs the NT05R I still have my hoosiers but they are a few years old now and starting to get a little harder than I would like. Maybe a few good burnouts will help them hook a bit better!
__________________
95 390 LPE ZR1 (505 rwhp) LSV = Lingenfelter Super Vette Twin Turbo 2003 Z06 (800 RWHP) |
Thread Tools | |
Display Modes | |
|
|