NEW: PCV Lwr Hose & Connector...Finally! - ZR-1 Net Registry Forums

A26B · 01-31-2013

I had not planned to announce this until the parts were actually on the shelf & ready for shipment... but I couldn't contain myself. The tooling is done, the samples (see photo) approved and pending only manufacture & shipping (abt 30 days from now). It's been a on-again, off-again project with lots of correspondence & disappointment. Always the same, expensive tooling + impractical quantities = not feasible.

Anyway.... SOON in STOCK!
(No pre-orders please. I will add notification to this thread when they come in.)

As a Set: $78.95 (PCV not included)

Separately:
Top Connector: $25.00
Lower Hose: $60.00

GOLDCYLON · 01-31-2013

Very cool Jerry.

FU · 01-31-2013

Nice product reasonably priced .

ZZZZZR1 · 01-31-2013

nice work!

When available, I'd love to purchase one!

David

Blue Flame Restorations · 01-31-2013

Great job, Jerry. I know it's a lot of work to bring a product to market.

If it was easy, everyone would do it.

Hog · 01-31-2013

Congrats Jerry, always, a great LT5/ZR-1 promoter/supporter!

peace
Hog

HAWAIIZR-1 · 01-31-2013

Jerry,

Great job and thanks for helping to keep dream and the Heart of the Beast alive. That looks so much better than the soft flimsy rubber of the OEM. Our cars have a future with someone like you always leaning forward.

scottfab · 01-31-2013

Looks good. Does it come if bright red?
I prefer black (stock) but those with bright red
silicone hoses might want red and/or maybe chrome

kidding

RHanselman · 01-31-2013

Bravo Jerry!

What material did you use?

GSJoe · 02-01-2013

I plan to order both top and bottom from you when they become available. The originals on my 1990 look like they've just about had it. Thanks Jerry...I'll be looking for your post on availability coming hopefully soon.

01-31-2013	#1
A26B Join Date: Dec 2003 Location: Arcadia,OK Posts: 3,394	NEW: PCV Lwr Hose & Connector...Finally! I had not planned to announce this until the parts were actually on the shelf & ready for shipment... but I couldn't contain myself. The tooling is done, the samples (see photo) approved and pending only manufacture & shipping (abt 30 days from now). It's been a on-again, off-again project with lots of correspondence & disappointment. Always the same, expensive tooling + impractical quantities = not feasible. Anyway.... SOON in STOCK! (No pre-orders please. I will add notification to this thread when they come in.) As a Set: $78.95 (PCV not included) Separately: Top Connector: $25.00 Lower Hose: $60.00 __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

01-31-2013	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: NEW: PCV Lwr Hose & Connector...Finally! Very cool Jerry. __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-31-2013	#3
FU Join Date: Mar 2004 Location: Found Member Posts: 4,346	Re: NEW: PCV Lwr Hose & Connector...Finally! Nice product reasonably priced . __________________ Frank Urbo. NCM Lifetime member # 982 Registry Founding # 237

01-31-2013	#4
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Re: NEW: PCV Lwr Hose & Connector...Finally! nice work! When available, I'd love to purchase one! David

01-31-2013	#5
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: NEW: PCV Lwr Hose & Connector...Finally! Great job, Jerry. I know it's a lot of work to bring a product to market. If it was easy, everyone would do it. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

01-31-2013	#6
Hog Join Date: Jul 2010 Location: Woodstock, Ontario, Canada Posts: 1,275	Re: NEW: PCV Lwr Hose & Connector...Finally! Congrats Jerry, always, a great LT5/ZR-1 promoter/supporter! peace Hog

01-31-2013	#7
HAWAIIZR-1 Join Date: May 2010 Location: Japan Posts: 3,586	Re: NEW: PCV Lwr Hose & Connector...Finally! Jerry, Great job and thanks for helping to keep dream and the Heart of the Beast alive. That looks so much better than the soft flimsy rubber of the OEM. Our cars have a future with someone like you always leaning forward. __________________ Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048

01-31-2013	#8
scottfab Join Date: Jan 2009 Location: Portland Oregon metro area (Washington side) Posts: 3,207	Re: NEW: PCV Lwr Hose & Connector...Finally! Looks good. Does it come if bright red? I prefer black (stock) but those with bright red silicone hoses might want red and/or maybe chrome kidding __________________ Scott Vett owner since 1979._It's about the car and the people

01-31-2013	#9
RHanselman Join Date: Jul 2005 Location: Cresson, TX Posts: 970	Re: NEW: PCV Lwr Hose & Connector...Finally! Bravo Jerry! What material did you use? __________________ Ron Hanselman Founding Member #80 CM Lifetime Member #1093 1991 #383 Twin Turbo 1993 #099 Ruby, Jeal 368 w/Snake Skinner body 1961 White with Red Int

02-01-2013	#10
GSJoe Join Date: Jul 2011 Location: Charlotte, NC Posts: 135	Re: NEW: PCV Lwr Hose & Connector...Finally! I plan to order both top and bottom from you when they become available. The originals on my 1990 look like they've just about had it. Thanks Jerry...I'll be looking for your post on availability coming hopefully soon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode