ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 01-07-2013   #1
HAWAIIZR-1
 
HAWAIIZR-1's Avatar
 
Join Date: May 2010
Location: Japan
Posts: 3,582
Default What projects or modifications do you have planned in 2013?

Hey folks, I thought it was time to share what we all have planned for our Zs in 2013. I'm on my arse and was supposed to do some of these in 2012, but somehow other priorities too precedence and it never happened. Some of my plans are dependent on if I am moving back to Hawaii in a few months, but none the less, here are my plans:

1. Remove power antenna and install tune trapper stealth unit under rear tray; plug hole for now until I can shave hole with new paint job (on the shelf, need to find plug and paint)
2. HID headlight conversion (on the shelf)
3. Install DRM coilover suspension with new FX3 shocks and Banski complete C4 rear kits (waiting for DRM kit, Carter brackets, and Banski set-up)
4. Install C5 mirrors (on the shelf and already painted color matched)
5. Replace steering wheel with Momo competition and install NRG hub quick release/lock (on the shelf)
6. Make Christmas wreath for next year out of stock steering wheel once removed (XMas 2013)
7. Put SW headers back on and install new SW X pipe w/Dynomax Ultraflo 17220 (single 3" in/out) and Pypes Challenger tips (on the shelf)
8. Autometer dual gauge pillar mount with wide band A/F and fuel pressure gauges (have mount, need gauges)
9. Repair/replace two front speakers that are not working



Not in any particular order. Happy modding in 2013!

Craig
__________________
Craig
"ZR-1 NO KA 'OI"
"ZR-1 ICHIBAN"
1995 #228 Black/Black with Dunn Heads
ZR-1 owner since September 2003
ZR-1 Net Registry Founding Member #0074
NCM Lifetime Member #2048


Last edited by HAWAIIZR-1; 01-07-2013 at 05:51 AM.
HAWAIIZR-1 is offline   Reply With Quote
Old 01-07-2013   #2
BigJohn
 
BigJohn's Avatar
 
Join Date: Feb 2012
Location: Ledyard,CT
Posts: 8,249
Default Re: What projects or modifications do you have planned in 2013?

I don't have an antenna on my car. I don't know how Dave pluged it, but you can't tell I ever had one.
Never had any use for it anyway!

BigJohn is offline   Reply With Quote
Old 01-07-2013   #3
Fully Vetted
 
Fully Vetted's Avatar
 
Join Date: Sep 2012
Location: Rockwall, Tx
Posts: 1,510
Default Re: What projects or modifications do you have planned in 2013?

I've been looking at the Tune Trapper as well. Pretty neat little piece of equipment.
__________________
_________________

1994 AB/Grey #141

430 RWHP/392 RWTQ

FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned
B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener

BBC - Bling By Carter:
Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover
Fully Vetted is offline   Reply With Quote
Old 01-07-2013   #4
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: What projects or modifications do you have planned in 2013?

Quote:
Originally Posted by Fully Vetted View Post
I've been looking at the Tune Trapper as well. Pretty neat little piece of equipment.

Yeah I was looking at one too.. but I have to wonder how well it actually works..
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 01-07-2013   #5
scottfab
 
scottfab's Avatar
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
Default Re: What projects or modifications do you have planned in 2013?

Replace upper A arm bushings with well greased urethane ones
that match the bottom A arm ones done a few years back.
New front tires to match rear Goodrich ones.

This all depends on no more things like flying metal debris hitting my other car while driving down the road AND
no more leaking 85gal fish tanks in my living room. gezzzz
It makes a person wonder about the number "13" as in 2013.
__________________
Scott


Vett owner since 1979._It's about the car and the people

Last edited by scottfab; 01-07-2013 at 12:05 PM.
scottfab is offline   Reply With Quote
Old 01-07-2013   #6
Blue Flame Restorations
 
Blue Flame Restorations's Avatar
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
Default Re: What projects or modifications do you have planned in 2013?

Replace rear 335's with 345's. The 335's sure didn't last very long. Hmmmm????
__________________
1988 KOH Prototype EX5023 sold
1990 ZR-1 #444 Convertible
1990 ZR-1 Black #966
1991 ZR-1 Quazar Blue #296
1957 Duntov SS Project
Blue Flame Restorations is offline   Reply With Quote
Old 01-07-2013   #7
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: What projects or modifications do you have planned in 2013?

Quote:
Originally Posted by scottfab View Post
no more leaking 85gal fish tanks. gezzzz
That had to be a mess.. What kind of Fish

( sorry to get off topic)
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 01-07-2013   #8
Paul Workman
 
Paul Workman's Avatar
 
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
Default Re: What projects or modifications do you have planned in 2013?

Opening the TB to 63mm
Re-lining the roof panel
Tires. (I'm favoring the Nitto 555 and 555Rs. Thoughts?)

Quote:
Originally Posted by scottfab View Post
Replace upper A arm bushings with well greased urethane ones
that match the bottom A arm ones done a few years back.
New front tires to match rear Goodrich ones.

This all depends on no more things like flying metal debris hitting my other car while driving down the road AND
no more leaking 85gal fish tanks. gezzzz
I makes a person wonder about the number "13"
"Fish" reminds me of one of those traffic reports I heard one afternoon. The reporter (Atlanta area) was droaning on in the usual way that traffic reporters do, but in Atlanta, EVERY EXPRESSWAY on the loop has traffic issues - why bother reporting the same ol crap every 15 minutes, right? So, I just tuned the report out.

Suddenly the road was covered with some kind of chunky, bloody, mess that covered the entire lane for a couple hundred yards. I didn't see it until the car in front of me suddenly merged into an adjacent lane and I had nowhere to go but straight ahead. And the SMELL! OMG, I immediately started choking down vomit - the smell of rotting flesh was horrrrr-endous!!

Turns out a tanker truck carrying chicken guts, etc to a rendering plant lost its load. One of the electrically operated bottom dump hopper doors opened wide, spilling the entire contents of one of the tanker cells out onto the roadway.

The smell from the undercarriage remained in spite of using a double handful of quarters at a carwash. After 3 more days, I discovered some "treats" had gotten up on top of the cat heat shield and were cooking still...

P.
__________________
Good carz, good food, good friendz = the best of timez!

90 #1202
"FBI" top end ported & relieved
Cam timing by "Pete the Greek"
Sans secondaries
Chip & dyno tuning by Haibeck Automotive
SW headers, X-pipe, MF muffs

Former Secretary, ZR-1 Net Registry

Last edited by Paul Workman; 01-07-2013 at 10:25 AM.
Paul Workman is offline   Reply With Quote
Old 01-07-2013   #9
Blue Flame Restorations
 
Blue Flame Restorations's Avatar
 
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
Default Re: What projects or modifications do you have planned in 2013?

[QUOTE=Paul Workman;159236After 3 more days, I discovered some "treats" had gotten up on top of the cat heat shield and were cooking still...

P.[/QUOTE]


Paul, and they say there are no free lunches anymore!
__________________
1988 KOH Prototype EX5023 sold
1990 ZR-1 #444 Convertible
1990 ZR-1 Black #966
1991 ZR-1 Quazar Blue #296
1957 Duntov SS Project
Blue Flame Restorations is offline   Reply With Quote
Old 01-07-2013   #10
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: What projects or modifications do you have planned in 2013?

1. Carbon Fiber Dash Treatment APSIS Awaiting return of pieces
2. Install CF Shift Boot
3. Replace Console Sides
4. Replace A Pillar molding
5. Install new to me non cracked passenger door panel
6. Replace door weather stripping (not the upper sweeps)
7. Install ZR-1 AO diffuser plate (After Painting)
8. put on New Speed lingerie Nose Protector
9. put on new Speed lingerie mirror covers
10. Get AC serviced AGAIN Fing leak!
11. Touch up dingleberry on rear spoiler

Continue to tune car with Dom Until we get it close in the Ostrich II
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 01-07-2013 at 10:42 AM.
GOLDCYLON is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020