![]() |
#1 |
![]() Join Date: Jul 2005
Location: Northern California
Posts: 73
|
![]()
Attached are the pictures of the Torsion Dampener that was replaced on my 93 ZR1 recently and described in a e-mail on the net.
Thanks, Jerry 93 White ZR1 #397 |
![]() |
![]() |
![]() |
#2 |
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,406
|
![]()
how did it happen .did the rubber rot out? what did the motor do ? just curious
|
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Jul 2005
Location: Northern California
Posts: 73
|
![]()
John,
The car has 79000 miles, my belief is that the rubber got brittle and cracked, then the piece fell out. The engine had a slight vibration, I could tell something was not right, howver, those riding in the car could feel or hear nothing. You'll need a mirror to check it out, it's very difficult to see and I would not have found it. As I said in my Net e-mail the shop I took it to found it while inspecting the car. It is a PTA to change out. Thanks, Jerry |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Jerry, one thing to consider as well is the use of chemicals to clean around the engine compartment.
I never got the pics from you. |
![]() |
![]() |
#5 | |
![]() Join Date: Jul 2005
Location: Western Montana, now Maryland
Posts: 191
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
#6 |
![]() Join Date: Jul 2005
Location: Northern California
Posts: 73
|
![]()
Jeff,
Check your e-mail, if you didn't get the pic's or my latest e-mail to you concerning a Ron Davis Rad. then I have the wrong e-mail address for you; are you still at yahoo? Thanks, Jerry |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|