08-10-2012 | #1 |
Join Date: Aug 2012
Location: Saugus, MA.
Posts: 3
|
Engine noise at start
HI All, I have a 90 I got a few months ago. Whenever it's sits and is started the top of the motor is noisy just for a second, until the oil gets up. I was told it could be the timing chain or the tensioner. Any ideas?
|
08-10-2012 | #2 |
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,486
|
Re: Engine noise at start
richie, pretty typical for these motors for the reasons Cliff (Dynomite) stated.
|
08-10-2012 | #3 |
Join Date: Aug 2012
Location: Saugus, MA.
Posts: 3
|
Re: Engine noise at start
Thanks, so it doesn't really lead to something down the road? the motor has 39k...Richie
|
08-10-2012 | #4 |
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,486
|
Re: Engine noise at start
No, other than looks from people. "Oh, listen to that thing 'bout ready to blow up." Between chain rattle and the looks from the puff of smoke when you start. The 90's don't have exhaust valve seals and tend to smoke on start up.
|
08-10-2012 | #5 |
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,486
|
Re: Engine noise at start
BTW richie, how do you like 'er? Details and pics? -Steve
|
08-11-2012 | #6 |
Join Date: Aug 2012
Location: Saugus, MA.
Posts: 3
|
Re: Engine noise at start
Hi Steve, found the z in upstate NY. Needed a few things (radio repair, sleepy head light door, ant. mast and tires, a bent wheel and a good clean. Also lost a fuel pump the first hundred miles. I know welcome to the club) It is blk on blk. Drives great and runs strong. I have a 68 conv. 327/350 in pristine condition and prefer to drive the z most of the time. No Pics yet but soon...I guess I will get use to the noise wasn't looking foward to a tear down anyway...Richie
|
08-11-2012 | #7 |
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: Engine noise at start
It is in fact the CCT but there is an improved design out that quiets this.
__________________
Scott Vett owner since 1979._It's about the car and the people |
Thread Tools | |
Display Modes | |
|
|