LT5 Bling by carter200 - ZR-1 Net Registry Forums

Dynomite · 06-18-2012

Just have ta show some of our In-House Talent........(Carter and Lee)

Carter200 Bling

All Aluminum Caps are machined with very close tolerance and fit perfectly over existing caps.
All Aluminum caps are engraved as follows and as shown for the Brake Fluid Aluminum Caps.

1. POWER STEERING FLUID (Steering Wheel Etched)
2. RADIATOR 15 PSI CAP

3. WASHER FLUID ONLY (Wipers Etched)
4. ENGINE COOLANT OVERFLOW

5. BRAKE FLUID DOT 4 ONLY

GOLDCYLON · 06-18-2012

I see lots o Bling

ZZZZZR1 · 06-18-2012

Wow Now that's alot of blingo!!!!!!!!!!!!111

Sweet!!!!!

David

tomtom72 · 06-20-2012

Yo Cliff, that looks cool!

Tom

carter200 · 06-20-2012

Quote:

Originally Posted by scottfab

I'm really liking that breather box.
You're neglecting the oil filter. It needs a cover in stainless or aluminum. All it would need is a flat spring inside to hold it on.

Scott

Owner since 1997

I make those, too! Golden Cylon, HawaiiZR-1, and many others have one. Anyone want to post a pic of it on a motor..........Thanks, Carter

PS: No flat spring required

Paul in VA · 06-20-2012

Hi All:
Great Thread!

Any sources on replacement aluminum tanks for the various plastic tanks underhood?

RICKYRJ1 · 06-21-2012

I also sport Carter hardware but I pc'd them black and colored in the writing with a silver/red combo. My Coplon is also painted black. Always get big compliments directed at Carters work.

carter200 · 12-12-2012

Cliff,
Thanks for the kind words. I have the billet throttle body plates in stock right now and soon I'll have your order finished. Yank those coolant pipes off and let's bling em' up.............

Dynomite · 12-12-2012

Quote:

Originally Posted by carter200

Cliff,
I have the billet throttle body plates in stock right now and soon I'll have your order finished. Yank those coolant pipes off and let's bling em' up.............

I will do that when I get back on the 90' LT5 project. I am now on the 91' LT5 project

I am going to experiment with highlighting the various billet covers etching with Red when I figure out the best way to do that. The Etching on all the fluid caps and especially the Oil Filter Cover was perfect. The AMSOIL on top edge with ZR-1 in the middle and 10W 40 on bottom edge was excellent

If you have the billet TB plates in stock, PM me for a price and we can add that to the present batch.

I want to powder coat the 90' LT5 Cam Covers, Plenum and coolant pipes before I send them your way

Cliff

carter200 · 12-12-2012

Quote:

Originally Posted by Dynomite

I will do that when I get back on the 90' LT5 project. I am now on the 91' LT5 project

I am going to experiment with highlighting the various billet covers etching with Red when I figure out the best way to do that. The Etching on all the fluid caps and especially the Oil Filter Cover was perfect. The AMSOIL on top edge with ZR-1 in the middle and 10W 40 on bottom edge was excellent

If you have the billet TB plates in stock, PM me for a price and we can add that to the present batch.

I want to powder coat the 90' LT5 Cam Covers, Plenum and coolant pipes before I send them your way

Cliff

Cliff,
Yes, I prefer the coolant pipes be done first before I engrave them. The job turns out some much sweeter. PMing you now......

06-18-2012	#1
Dynomite Join Date: Aug 2009 Location: South Dakota/California Posts: 3,824	LT5 Bling by carter200 Just have ta show some of our In-House Talent........(Carter and Lee) Carter200 Bling All Aluminum Caps are machined with very close tolerance and fit perfectly over existing caps. All Aluminum caps are engraved as follows and as shown for the Brake Fluid Aluminum Caps. 1. POWER STEERING FLUID (Steering Wheel Etched) 2. RADIATOR 15 PSI CAP 3. WASHER FLUID ONLY (Wipers Etched) 4. ENGINE COOLANT OVERFLOW 5. BRAKE FLUID DOT 4 ONLY __________________ Left Clickable links -Solutions- LT5 Modifications/Rebuild Tricks Low Mileage ZR-1 Restoration 1990 Corvette (L98) Modifications LT5 Eliminated Systems LT5 Added Systems LT5/ZR-1 Fluids 1995 LT5 SPECIFIC TOP END REBUILD TRICKS Last edited by ZBrink; 5 Days Ago at 10:22 PM.

06-18-2012	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,147	Re: Bling I see lots o Bling __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

06-18-2012	#3
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,684	Re: Bling Wow Now that's alot of blingo!!!!!!!!!!!!111 Sweet!!!!! David

06-20-2012	#4
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,637	Re: Bling Yo Cliff, that looks cool! Tom __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member

06-20-2012	#6
Paul in VA Join Date: Sep 2010 Location: Sterling, VA Posts: 147	Re: Bling Hi All: Great Thread! Any sources on replacement aluminum tanks for the various plastic tanks underhood? __________________ Thanks ... Paul (Paul in VA) WAZOO Member

06-21-2012	#7
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,176	Re: Bling I also sport Carter hardware but I pc'd them black and colored in the writing with a silver/red combo. My Coplon is also painted black. Always get big compliments directed at Carters work.

12-12-2012	#8
carter200 Join Date: Jun 2004 Location: Texas Posts: 2,431	Re: Bling Cliff, Thanks for the kind words. I have the billet throttle body plates in stock right now and soon I'll have your order finished. Yank those coolant pipes off and let's bling em' up............. __________________ 95 ZR-1 BLK/Gry #392 LT5 Reg# 868 RIP ZR1NET Founding Mem #155

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode