ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > Cleaning and Waxing

Reply
 
Thread Tools Display Modes
Old 05-21-2012   #1
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,094
Default Anyone yet figure a way to clean stains on engine?

I have not been watching the forums for a long time and I wondered if anyone has come up with a safe and effective way to clean the stains that can appear on our engines due to use of cleaning fludis or other reasons. Mine is not terrible but it would be nice to be able to get the car looking new again. Or is refnishing really the only way to go? Thanks--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 05-21-2012   #2
Kevin
 
Kevin's Avatar
 
Join Date: Jun 2005
Location: pittsburgh
Posts: 4,632
Default Re: Anyone yet figure a way to clean stains on engine?

i've had some success with a colinite product that Gordon told me about. i'll have to check on it this week, can't remember the number
__________________
It's not the car, it's the people - Doug Johnson
90 r/r "KEYS ON" nick named "T.L.B"
Kevin is offline   Reply With Quote
Old 05-21-2012   #3
John Boothby
 
John Boothby's Avatar
 
Join Date: Jul 2005
Location: Las Vegas, Nevada
Posts: 777
Default Re: Anyone yet figure a way to clean stains on engine?

Your "new" polo green '95 sounds like the one that lived around the corner from me. It had around 14K on the od in '05 then he sold it. I do not know to whom he sold it, but there were only 31 polo green ZR-1's in 95. And the milage would be about right. Did your's once reside in Las Vegas? Anyway, you have a nice car there!!
__________________
JB
1990 #148 Red/Saddle
Haibeck AYBKG5 Chip/RC Engineering/Flowmasters/K&N/Samco/Fuzzy Dice
:cheers:
John Boothby is offline   Reply With Quote
Old 05-21-2012   #4
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
Default Re: Anyone yet figure a way to clean stains on engine?

Quote:
Originally Posted by HILKING View Post
I have not been watching the forums for a long time and I wondered if anyone has come up with a safe and effective way to clean the stains that can appear on our engines due to use of cleaning fludis or other reasons. Mine is not terrible but it would be nice to be able to get the car looking new again. Or is refnishing really the only way to go? Thanks--Bob
Bob,

If you're interested in refinishing, let me know. Got a great paint guy who did mine.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman
Former ZR-1 Registry - BOD
1972 Corvette 4speed base Coupe SOLD long time ago
1984 Corvette Z-51/4+3 SOLD
1992 Corvette ZR-1 Aqua/Gray #474 SOLD
1992 Corvette ZR-1 Black Rose/Cognac #458
2014 Honda VFR Interceptor DX
XfireZ51 is offline   Reply With Quote
Old 05-22-2012   #5
SteelBlueZR1
 
Join Date: Aug 2011
Location: Evergreen, Co.
Posts: 346
Default Re: Anyone yet figure a way to clean stains on engine?

I just spent a few hours with Meguiar's Ultimate (liquid) Compound and microfiber cloths, followed by polishing with Meguiar's Ultimate Polish and the engine paint stains were removed, and the paint become shiny and deep in appearance, but even with a 6k mile car, it took many applications to remove all the stains and dirt.
I followed the recommendations of Jim Voter, except used different products. His full write up is at: http://www.zr1.net/forum/showthread....t=engine+clean
__________________
Bert Rankin
1991 ZR1 Steel Blue / Steel Blue
#1029
Haibeck chip, slotted rotors, camber brace, C-beam plates, OBX exhaust, Nitto NT555 tires
[SIGPIC][/SIGPIC]
SteelBlueZR1 is offline   Reply With Quote
Old 05-22-2012   #6
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,094
Default Re: Anyone yet figure a way to clean stains on engine?

Quote:
Originally Posted by John Boothby View Post
Your "new" polo green '95 sounds like the one that lived around the corner from me. It had around 14K on the od in '05 then he sold it. I do not know to whom he sold it, but there were only 31 polo green ZR-1's in 95. And the milage would be about right. Did your's once reside in Las Vegas? Anyway, you have a nice car there!!
According to the Auto Check it was a So Cal car all its life and it belonged to the last owner since 1998. Seems like an OK car and runs well but Marc will get it as soon as he can take it to go over it.
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 05-22-2012   #7
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,094
Default Re: Anyone yet figure a way to clean stains on engine?

Quote:
Originally Posted by SteelBlueZR1 View Post
I just spent a few hours with Meguiar's Ultimate (liquid) Compound and microfiber cloths, followed by polishing with Meguiar's Ultimate Polish and the engine paint stains were removed, and the paint become shiny and deep in appearance, but even with a 6k mile car, it took many applications to remove all the stains and dirt.
I followed the recommendations of Jim Voter, except used different products. His full write up is at: http://www.zr1.net/forum/showthread....t=engine+clean
Thanks Bert--I read that series of posts and will try Jim's recommendations.-Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"
WARP TEN is offline   Reply With Quote
Old 06-10-2012   #8
randy ransome
 
randy ransome's Avatar
 
Join Date: Mar 2006
Location: Olive Branch,MS
Posts: 291
Default Re: Anyone yet figure a way to clean stains on engine?

I used a Mr. Clean Magic eraser and had Good results. It surprised me how good it worked.
randy ransome is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020