04-23-2012 | #1 |
Join Date: Feb 2012
Location: Wilmington, NC
Posts: 55
|
1st Attempt at Problem Solving
It's long. No hard feelings if you bail out now.
So while most of you were enjoying some brand of Midwestern BBQ or some sort of Italian sausage I am not completely comfortable talking about in most social circles I made my first real attempt at turning wrenches on my car. I have been having the intermittent no-start problem and despite the local Chebby dealer "fixing" my INFL REST problem, the silly light keeps coming on. I tackled both on this rainy Sunday. I am not a shade tree mechanic. Not even close. And my previous experience and qualifications include changing the Penzoil in my 1991 Camaro circa 1995. That's about it. But I work on power wheelchairs for a living and I am good at homework. It is entirely possible that the no-start problem is the starter, but it seems like most of those ordeals either get chalked up to a weak battery or a bad ground somewhere along the way. So on Hib's suggestion I had ordered a new Odyssey. The Odyssey stays charged longer when the cars sits undriven and since the gases are recirculated inside the battery there is no future corrosion on the terminals to deal with. I got the side panel off and the old battery out without much trouble. The bottom bolts on the battery box are a little tight, but a 3/8 ratchet with an extension and a universal joint did the trick. The A/B sensor was right where it was supposed to be, but it was "glopped" to the frame with rtv or some other kind of black goop. Thank you Chebby. I had already scraped away enough in this photo to get the thing off, but you get the picture. I cleaned the sensor... And the frame and the two grounds... And put it all back together. And believe it or not, the damn thing started. On top of that, I cleared the K codes and Eureka, the INFL REST light did not come back on. I am man, hear me roar. Two questions: 1. There is a connector hanging behind the battery box that is not connected to anything. Can anyone tell me what it does? And why isn't it plugged into something else? 2. The conduit that holds the wires that wraps around the inside rear corner of the battery box was cut. I wrapped it in electrical tape because that was the best I had. Is there anything inside this conduit that was getting too hot or shorting out and causing my no-start? Thanks for tolerating. |
04-23-2012 | #2 |
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: 1st Attempt at Problem Solving
Gotta love it when it gets fixed the first time. All of these cars have a few gremlins and once you drive it enough and sort them out, they become more pleasurable once you forget about the hassles of fixing it.
|
04-23-2012 | #3 |
Join Date: Feb 2010
Location: Arvada Colorado
Posts: 194
|
Re: 1st Attempt at Problem Solving
Is your car a 90? Its the fuel pump test plug. If you jump it to the positive side of the battery with the key on it will run the fuel pumps. I just had to do this on mine.
__________________
[I]4-cam[/I] [I]1991 ZR-1 Blk/Gry #31[/I] [I]SW Headers/Xpipe- Dynomax Muffs[/I] [I]Ported top end[/I] [I]Secondaries Removed[/I] Tune by Dominic |
04-23-2012 | #4 |
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
|
Re: 1st Attempt at Problem Solving
all I can say is Kudos to ya! Now you know what it feels like to track down the gremlins, which btw no one else at the dealership seem to care much about, and shoot them in the back of the head! Twice.
Be proud, be very proud! Tom
__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member |
04-23-2012 | #5 |
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: 1st Attempt at Problem Solving
Good job!
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
04-23-2012 | #6 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: 1st Attempt at Problem Solving
Yeah its the little things. Great job.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
04-23-2012 | #7 | |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: 1st Attempt at Problem Solving
Quote:
P.
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
04-23-2012 | #8 |
Join Date: Feb 2010
Location: Arvada Colorado
Posts: 194
|
Re: 1st Attempt at Problem Solving
You are correct. My memory isn't what it used to be. Thanks for catching that
__________________
[I]4-cam[/I] [I]1991 ZR-1 Blk/Gry #31[/I] [I]SW Headers/Xpipe- Dynomax Muffs[/I] [I]Ported top end[/I] [I]Secondaries Removed[/I] Tune by Dominic |
Thread Tools | |
Display Modes | |
|
|