02-16-2012 | #11 |
Join Date: Oct 2011
Location: Between Texas & Calif
Posts: 120
|
Re: Passed California SMOG test today
Are stock chip available these days?
__________________
Erv Myers 1990 ZR1 #1964 |
02-16-2012 | #12 |
Join Date: Aug 2009
Location: Livermore, Ca
Posts: 204
|
Re: Passed California SMOG test today
You can find them on Ebay or on here running ~$200 to $400. When they come up....
Did you check the code on your chip?
__________________
1990 ZR-1 #642 |
02-17-2012 | #13 |
Join Date: Oct 2011
Location: Between Texas & Calif
Posts: 120
|
Re: Passed California SMOG test today
Not yet, traveling this week. When I unhook the cables to drop the box should I have the battery disconnected?
__________________
Erv Myers 1990 ZR1 #1964 |
02-17-2012 | #14 |
Join Date: Feb 2009
Location: Alexandria, Virginia
Posts: 1,467
|
Re: Passed California SMOG test today
There's one out there now...here's the link.
http://www.ebay.com/itm/1990-LT5-Cor...item5648666654 Rich
__________________
1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member |
02-17-2012 | #15 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,079
|
Re: Passed California SMOG test today
Unhook the cables?It take about 2 minutes to gain access to the chip.Disconnect the battery,remove the 2 10MM nuts on the left side of the ECM,lift the ECM out of the bracket,flip the ECM over and you will see 4 7MM bolts holding a small panel in place.The battery is the only thing you need to disconnect.
|
02-17-2012 | #16 |
Join Date: Oct 2011
Location: Between Texas & Calif
Posts: 120
|
Re: Passed California SMOG test today
Will do when I return to Texas.
Thanls
__________________
Erv Myers 1990 ZR1 #1964 |
Thread Tools | |
Display Modes | |
|
|